Mitsubishi BR-LM1KK User Manual

ENGLISH EN-1 WALL MOUNT BRACKET MODEL BR-LM1KK for LM55S1, LM55P1, LM46P1 Quick Start Guide FOR INSTALLER

EN-10 3.2 Display open / closeDisplay closing Release the lock bar at the right lower side of the front bar to lift and push it. Push the panel ligh

ENGLISH EN-11 44 CChheecckk aafftteerr iinnssttaalllliinngg Check in according with the following checklist after installing. Be sure to take meas

EN-2 Contents 1 Safety precaution ...

ENGLISH EN-3 11 SSaaffeettyy pprreeccaauuttiioonn This product requires special installation to prevent falling or toppling. This should be done

EN-4 22 PPrreeppaarraattiioonn Tools Prepare the following tools.. Necessary tools Hex keys (4mm, 5mm) Phillips screwdriver (#2) Wrench (8mm) Lev

ENGLISH EN-5 Portrait [LM55S1/P1] [LM46P1] 2 Remove in order ①2 display brackets (L/R),

EN-6 Portrait  In portrait orientation, always rotate top side right in consideration of the panel holding structure. [LM55S1/P1]

ENGLISH EN-7 10 Fix the bracket on the wall with supplied 4 bolts and washers. 11 Hang the brackets on the both sides, (2) and (3), on

EN-8 33 DDiissppllaayy aattttaacchhiinngg 3.1 Display mountingStarting from the panel at the center of the middle row in the display wall, spread

ENGLISH EN-9 6 Tie the wire with the clampers attached to the display not to .run it off the edge of the display.  Fix the wire on the back of the