1DLP™ ProjectorMODELHC7900DWControlling the projector using a personal computerThis projector can be controlled by connecting a personal computer with
22. Control command congurationThe command consists of the address code, function code, data code, ACK/NAK, and end code. The length of the command v
3Projector errorSend out “00vER” to check error details.Recover from error state.0–3To normal operation4Enter password.Send out “00PSLOCK0****”.Projec
44. Command list4.1 Operation commandsThe operation commands are used for the basic operation setting of this projector. They may not be executed whi
5Use the following commands to obtain other information. ITEMFunctionData (Receive)CharacterASCIIModel name vMDL76h 4Dh 44h 4Ch****************(wit
64.4 Menu setting commands (Not executable in stand-by mode. Possible only to read during muting.)The menu setting commands are used for the menu se
7ITEMFunctionDataCharacter ASCIIBACK COLOR BB 42h 42h 0 (BLACK), 1 (BLUE)IMAGE REVERSE IR 49h 52h 0 (OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR INVERT)
8How to set the valueUse the character or ASCII code as shown below to set the value.Character + - 0 1 2 3 4 5 6 7 8 9ASCII ‘2Bh’ ‘2Dh’ ‘30h’ ‘31h’ ‘3
Comments to this Manuals