Mitsubishi CP-D707DW Instruction Manual download pdf (Page 16)

OTHERSPRECAUTIONS FEATURES PREPARATION

TROUBLE-

SHOOTING

CONTENTS

BEFORE OPERATION

INK RIBBON INSTALLATION

After installing the print paper, install the ink cassette into this unit.

Before installing the ink cassette into this unit, load the ink ribbon in the ink cassette.

NOTE

• Place the ink cassette on a at surface, when loading the ink ribbon.

• Select a place that is free of dust when loading the ink ribbon. Dust or dirt

settling on the ink ribbon results in poor print quality.

• Make sure that the shafts of the ink ribbon t into the ink cassette rmly.

Load the ink ribbon in the ink cassette as shown below.

Make sure to load it in the correct position.

1 2

Ink ribbon

Shaft

Ink cassette

Handle

Ditch

Make sure to set the ink ribbon roller to the ditches rmly.

Turn the shaft to eliminate any slack.

Place the ink cassette containing the ink ribbon in the

position as shown in the illustration.

To insert the ink cassette, align the protrusions on both sides of the

cassette with the right and left guides inside the printing unit and slide it in

a slanting direction.

Mount the ink cassette to the back rmly by holding the handle.

NOTE

Do not touch the thermal head.

Fingerprints or dust on the thermal head will degrade the print quality.

CAUTION

Do not touch the thermal head right after printing because it is

extremely hot. Otherwise you may get burned or injured.

NOTE

Note that the thermal head is quite sensitive to static electricity. When

you touch the thermal head while carrying static electricity on your

body, the thermal head may be damaged.

Handle

Protrusion

Guides

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

No comments

Mitsubishi CP-D707DW Instruction Manual Page 16