Mitsubishi WD-52525 Service Manual download pdf (Page 5)

MODELS: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825

Page 5

CABINET DISASSEMBLY (FRONT VIEW)

WD-52525 / WD-62525 / WD-52725 / WD-62725

Front Cabinet Disassembly

1. Remove the SPEAKER-GRILLE by pulling forward.

2. Remove screws (a) to remove the COVER-FRONT.

3. Remove screws (b) on the rear of the upper back cover (4 across the top and 3 on each side)..

4. Remove the 4 screws (c) holding the bottom of the Screen Assembly.

5. Unplug connector LN from the Control Panel.

6. Lift the Screen Assembly up slightly then pull towards the front to remove the assembly

*Refer to the Parts List for Part Numbers

Reusable Wire Ties

Do not cut wire ties during disassembly. Reusable wire

ties are used in these models. Lift the tab to release the

wire tie. During reassembly, re-use wire ties to ensure all

wiring harnesses are properly bundled and dressed.

Lift Tab to Release

Wire Tie

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Mitsubishi WD-52525 Service Manual Page 5