Mitsubishi WD380U-EST User Manual download pdf (Page 26)

EN-26

Installation menu

Installation

Adjust

Exit

Select

Menu Position

Image Reverse

Auto Power On

Auto Power Off

Auto Keystone

Language

Reset All

Upper Left

Off

English

Off

5Min

Standby Mode

Low

Lamp Mode

Standard

ITEM SETTING FUNCTION

Menu Position 5 options Use this setting to change the position of the menu on the screen.

Lamp Mode Standard Select this option when you want to view images in a well-lit room.

Low Select to moderate the intensity of the lamp. The operating sound is reduced

and the lamp lifetime becomes longer.

• Whenthismodeisswitched,projectedimagesmayicker.

• Ifthismodeisfrequentlyswitched,thelampmaybedeteriorated.

Standby Mode Low Select this option when you don’t use the LAN control, speaker output and

monitor output during power standby. This option disables them and reduces

the power consumption during the power standby.

LAN Select this option when you control the projector via the LAN during power

standby.

Speaker Out Select this option when you want to output audio from the speaker during

power standby.

Monitor Out Select this option when you want to output video signal from the MONITOR

OUT terminal in addition to the audio from the speaker during power standby.

Image Reverse Off Select this setting when you want to view images from the front with the

projector set on the ﬂoor.

Mirror Select this setting when you want to view images from behind the screen with

the projector set on the ﬂoor.

Invert Select this setting when you want to view images from behind the screen with

the projector set at the ceiling.

Mirror Invert Select this setting when you want to view images from the front with the

projector set at the ceiling.

Auto Power On Off / On When this mode is set to On, the lamp is automatically lit when the power

cord is plugged in the wall outlet. Select On when you set the projector at the

ceiling.

• Whenthelampisoff,theprojectorisinstandby.Usetheremotecontrolto

turn on the lamp.

Auto Power Off Off / 5-60 Min Selects a desired timer setting until the projector enters the standby mode

when there is no signal input from the source.

Auto Keystone Off / On Select Auto Keystone function.

Language 18 languages Selects a desired language for the menu.

Reset All OK Resets all menu settings except for Password and Language to the default.

• Bydefault,theLampModeissettoStandard.TheLampModeissettoeitherStandardorLowdependingonthesettinglast

selected, and you cannot switch the Lamp Mode in about one minute after the lamp is on.

• WhentheStandbyModeissettoSpeakerOutorMonitorOut,theaudioofthelastselectedinputisoutputduringstandby

mode. However, no audio is output when the last selected input was HDMI.

• Duringstandbymode,youcannotchangetheaudioinputandthevolumefromthespeaker.

• WhenStandbyModeissettoLAN,SpeakerOut,orMonitorOut,thefansrotateatverylowspeedduringstandbyafter

plugging the power cord (with 5 second high speed rotation at the beginning) and after turning off the lamp. This is to cool

down the projector operating various functions during standby and is not a malfunction. When Standby Mode is set to Low,

the fans stop during standby.

Menu operation (continued)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Comments to this Manuals

No comments

Mitsubishi WD380U-EST User Manual Page 26

Comments to this Manuals

Related products and manuals for Projectors Mitsubishi WD380U-EST