Mitsubishi MDT521S User Manual download pdf (Page 13)

English-12

13. When MDT521S is installed in portrait

position

Conditions

MDT521S can be installed in portrait position, under the fol-

lowing conditions:

Caution:

Portrait position is effective only when wall-mounted or

ceiling-mounted.

The stands(legs) can not be ﬁ tted to the monitor in portrait

position.

Placing the monitor in portrait position, will shorten the aver-

age life of the LCD backlight.

Operational Environment (Temperature) shall be limited, as

shown below:

Operational

Environment:

Temperature 5 - 35 °C / 41 - 95 °F

Humidity 20 - 80 % (without condensation)

Please orientate the monitor in the direction shown below:

Do not place monitor in landscape in any other manner.

Optional speakers (SP-521S) can not be attached when this

LCD monitor is installed in portrait position.

How to set-up

The “

” logo should be on the LEFT side when

facing the monitor.

MDT521S

90°

Landscape

CounterclockwiseClockwise

CAT5 video connection

The CAT5 video connection function is for transmitting the

analog RGB video signal of the computer and the control

signal of the monitor over a long distance using CAT5 cables.

The computer can control the monitor via the supplied CAT5

Tx BOX.

Caution:

Never connect network devices (such as a hub and a comput-

er for LAN) to the CAT5 Tx BOX and the IN and OUT connec-

tors of the monitor. If they are connected, the network devices

themselves, CAT5 Tx BOX, and monitor may be damaged.

1. Installation of the USB driver for CAT5

serial communication control

To connect the computer and the CAT5 Tx BOX via USB inter-

face, it is necessary to install the USB driver to the computer

from the CD-ROM supplied with the monitor.

(When connecting the computer and the CAT5 Tx BOX via

RS-232C interface, you don’t have to install the USB driver.)

OS supported: Windows XP, Windows Vista

How to install:

1) Installation to Windows XP

Start the “PL2303-Driver_XP2K_v

******

.exe” ﬁ le in the

Windows XP folder on the CD-ROM supplied with the monitor

and install the driver according to the instructions displayed

on the screen.

2) Installation to Windows Vista

Start the “PL2303_Proliﬁ c_Vista_

******

.exe” ﬁ le in the

Windows VISTA folder on the CD-ROM supplied with the

monitor and install the driver according to the instructions

displayed on the screen.

2. Connection of the CAT5 video connec-

tion function

There are two cases of connection.

1) Connection to one monitor

1. Connect the USB connector of the supplied CAT5 Tx BOX

and that of the computer using a commercially available

USB cable. (When the USB driver isn’t available, connect

an RS-232C cable in addition to the USB cable. In this

case, the RS-232C cable serves for supplying the power

to the CAT5 Tx BOX.) See page 35.

Monitor

Computer

USB cable

CAT5 cable

VGA (mini D-SUB 15-pin) cable (supplied)

CAT5 Tx BOX

(supplied)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments

Mitsubishi MDT521S User Manual Page 13

Comments to this Manuals

Related products and manuals for Public displays Mitsubishi MDT521S