1HDD Extension UnitINSTALLATION AND OPERATION MANUALMODELDX-ZD6UETHIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR HDD EX
10StartupStep1 Turn ON the MAIN switch on the rear of this unit.Step2 Turn on the MAIN switch on the rear of the recorder.• The POWER indicator of
ENGLISH11Setting the ID number of this unitStep1 Turn OFF the MAIN switch on the rear of this unit.Step2 Remove the cover of this unit accord
12HDD operation modeThis unit has 2 HDD operation modes as described below. Spanning modeThis mode regards and uses 2 built-in HDDs as 1 HDD. The tota
ENGLISH13Step7 Attach the cover of this unit according to steps 9 to 11 of “Attaching the HDD” on page 17.Step8 Turn ON the MAIN switch on the rear
14Replacing the HDDPrecautions for replacing the HDDWARNING• Do not remove the top cover of the unit.Notice• Be fo re you rep lac e th e HD D,
ENGLISH15Step4 Disconnect 2 cords connected to the circuit board on the metal part. Step5 Remove the metal part.• Remove 4 screws on the meta
16Attaching the HDDNotice• When you attach multiple HDDs, attach them in the order of HDD 1 and 2.Step1 Attach the new HDD onto the HDD
ENGLISH17Step9 Attach the front covers.• Attach the left cover first and push it to the left.• Then, attach the right cover. Step10 Fix the front co
18NoNoNoNoNoYesYesYesMirroringSpanningYesYesYesBoth indicators of HDD 1 and HDD 2 illuminate red.Both indicators of HDD 1 and HDD 2 blink red.Is the o
ENGLISH19TroubleshootingIf problems with the unit persist even after you followed the suggestions below, please stop using the unit, disconnect the po
2HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNITTouching the inside of the cabinet or
20SpecificationsGeneral Rated Power Supply: 100 to 240 V AC, 50/60 Hz Rated Input: 0.75 - 0.4 A (100-240 V)Operating Temperature: 41 °F-104 °
ITALYMitsubishi Electric Europe B.V. Italian Branch Offi ce Centro Direzionale Colleoni Palazzo Perseo - Ingresso 2, Via Paracelso 12, 20041 Agrate Br
ENGLISH3The HDD and cooling fan of this unit are driving parts. For stable recording, it is recommended that both of these parts are replaced every 30
4WarningThis is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
ENGLISH512341 POWER indicatorWhen the EXTERNAL CONTROL switch is set to OFF or it is set to ON with the connected recorder turned on, this
6TEMP ALM terminalTerminal for informing of high internal temperature.FAN ALM terminalTerminal for informing of abnormality of the fan.HDD ALM termina
ENGLISH7Notice• It is impossible to supply 5V DC power from this port.• Do not connect any devices other than DX-ZD6UE to these output ports.
8ConnectionsConnectable recordersMITSUBISHI DIGITAL RECORDER • DX-TL5000 series (DX-TL5000U, DX-TL5000E, DX-TL5000UA, DX-TL5000E400, DX-TL5000E(Z))•
ENGLISH9 Precautions for connectionNotice• When connecting 5 or more HDD extension units (with 2 HDDs mounted on each unit) to the digital recorder,
Comments to this Manuals