-
13
-
(5) The range of temperature setting.
When using the wired remote control in parallel with the wireless remote control:
It is necessary to change the setting temperature range for the wired remote control. (The setting temperature may not be displayed
correctly unless it is changed.) Change the setting temperature for the wired remote control with the following procedure 2).
When shipped, the range of set temperature differs depending on the operation mode as below.
Heating : 16~30°C (55~86°F)
Except heating (cooling, fan, dry, automatic) : 18~30°C (62~86°F)
1) Upper limit and lower limit of set temperature can be changed with remote control.
Upper limit setting: valid during heating operation. Possible to set in the range of 20 to 30°C (68 to 86°F).
Lower limit setting: valid except heating (automatic, cooling, fan, dry) Possible to set in the range of 18 to 26°C (62 to 79°F).
When you set upper and lower limit by this function, control as below.
a) When !2 TEMP RANGE SET, remote control function of function setting mode is "INDN CHANGE" (factory setting),
[If upper limit value is set]
During heating, you cannot set the value exceeding the upper limit.
[If lower limit value is set]
During operation mode except heating, you cannot set the value below the lower limit.
b) When !2 TEMP RANGE SET, remote control function of function setting mode is "NO INDN CHANGE"
[If upper limit value is set]
During heating, even if the value exceeding the upper limit is set, upper limit value will be sent to the indoor unit.
But, the indication is the same as the temperature set.
[If lower limit value is set]
During except heating, even if the value lower than the lower limit is set, lower limit value will be sent to the indoor unit.
But, the indication is the same as the temperature set.
2) How to set upper and lower limit value
Previous button
It is possible to finish by pressing
ON/OFF button on the way, but
unfinished change of setting is
unavailable.
During setting, if you press
(RESET) button, you return to the
previous screen.
f)-
g)-
b)
h)
c)
g)
a)
e) f)
a) Stop the air-conditioner, and press (SET) and (MODE) button at the same time for over three seconds.
The indication changes to "FUNCTION SET "
b) Press button once, and change to the "TEMP RANGE " indication.
c) Press (SET) button, and enter the temperature range setting mode.
d) Confirm that the "Upper limit " is shown on the display.
e) Press (SET)button to fix.
f) 1Indication: " SET UP" "UPPER 28˚C "
2Select the upper limit value 30˚C with temperature setting button . "UPPER30˚C " (blinking)
3Press (SET) button to fix. "UPPER 30˚C" (Displayed for two seconds)
After the fixed upper limit value displayed for two seconds, the indication will retum to "UPPER LIMIT ".
g) Press button once, "LOWER LIMIT " is selected, press (SET) button to fix.
1Indication: " SET UP" "LOWER 20˚C "
2Select the lower limit value 18˚C with temperature setting button . "LOWER18˚C " (blinking)
3Press (SET) button to fix. "LOWER 18˚C" (Displayed for two seconds)
After the fixed lower limit value displayed for two seconds, the indication will retum to "LOWER LIMIT "
h) Press ON/OFF button to finish.
(5 pages)
(26 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals