Mitsubishi MS-A12WA-1 Operations Instructions download pdf (Page 5)

En-4

• Make sure the polarity of the batteries is correct.

• Do not use manganese batteries. The remote controller could malfunction.

• Do not use rechargeable batteries.

•

Replace all batteries with new ones of the same type.

•

tteries can be used for approximately 1 year. However, batteries with

expired shelf lives last shorter.

Before operation: Insert the power supply plug into the power outlet and/or

turn the breaker on.

Installing the remote controller batteries

PREPARATION BEFORE OPERATION

RESET

CLOCK

Remove the front lid

Insert AAA

alkaline batteries

Install the front lid

• Press RESET and CLOCK gently using a thin stick.

If the RESET button is not pressed, the remote

controller may not operate correctly.

RESET

CLOCK

Press RESET

Press CLOCK

Press CLOCK again

Press the TIME buttons to set the

time

Each press increases/decreases

time by 1 minute (10 minutes

when pressed longer)

Setting current time

Changing temperature units (ºF/ºC)

Press RESET while

the temperature but-

tons are pressed.

• Press RESET gently using a thin stick.

The preset unit is ºF.

SG79Y951H01_EN.indd 4 4/9/07 4:19:37 PM

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Mitsubishi MS-A12WA-1 Operations Instructions Page 5