Mitsubishi PAR-31MAA Installation Manual download pdf (Page 7)

Ventilation operation

Automatic cooling/heating operation

Press button 1 ( ON/OFF ).

Press button 7 ( F1 ) to display the operation mode "Auto".

When the room temperature is higher than the preset temperature, cooling operation starts.

When the room temperature is lower than the preset temperature, heating operation starts.

* The current operation mode ("Auto cool" or "Auto heat") will be displayed after the mode is determined.

If "Display/non-display of COOL/HEAT during AUTO mode" has been set to "Non-display" while making

the initial settings, only "Auto" will be displayed. Refer to the Installation Manual for details about initial

settings for the remote controller.

Press button

1 ( ON/OFF ) to turn both the indoor unit and the ventilation unit on.

Press button

4 ( MENU ).

"Vane•Louver•Vent.(Lossnay)" is

selected. Press button

2 ( SELECT ).

Press button

9 ( F3 ) to

change the fan speed.

F1 F2 F3 F4

Fri

LouverVent.Vane

Low

F1 F2 F3 F4

Main

Main display:

Cursor Page

Main menu

Vane·Louver·Vent. (Lossnay)

High power

Timer

Weekly timer

OU silent mode

F1 F2 F3 F4

Cool

Room

AutoSet temp.

Mode Temp. Fan

Fri

Indoor unit fan may operate even when the ventilation unit is operated individually, depending on the models of the indoor unit and the

ventilation unit.

When the room temperature is higher than the preset cooling temperature, cooling operation starts.

When the room temperature is lower than the preset heating temperature, heating operation starts.

* When the operation mode is set to the Auto (dual set point) mode, only "Auto" will appear on the display, even

if the display setting of "Auto cool/Auto heat" is enabled.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Mitsubishi PAR-31MAA Installation Manual Page 7

Comments to this Manuals

Related products and manuals for Thermostats Mitsubishi PAR-31MAA