1DLP ProjectorEX320U/EW330U/EX320U-ST/EX321U-ST/EW331U-STControlling the projector using a personal computerThis projector can be controll ed by con
22. Control command configurationThe command consists of the address code, function code, data code, ACK/NAK, and end code. The length of the com-mand
3[Example 1] Turning ON the power. (Values enclosed in quotation marks are ASCII codes.):[Example 2] Selecting VIDEO as the input signal during auto p
4[RS-232C control flowchart]Sending out commandOKNGENDNAK returnedCommand sending fails.No NAK returnedSTARTCommand is sent successfully.Command is e
54. Command list4.1 Operation commandsThe operation commands are used for the basic operation setting of this projector. They may not be executedwhil
64.3 Remote commands (Not executable in stand-by mode.) The remote commands allow the computer to control the projector in the same way as by the re
Comments to this Manuals