Mitsubishi PJLink FD630U User Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
EN-42
Specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Type DLP™ projector
Model FD630U/FD630U-G
Rated power supply 100 - 240 V AC, 50 / 60 Hz
Power consumption
4.0 A
During standby:
AC 100-120V: 3W (when STANDBY MODE is STANDARD)
0.4W (when STANDBY MODE is LOW)
AC 220-240V: 3.3W (when STANDBY MODE is STANDARD)
0.5W (when STANDBY MODE is LOW)
Display Technology
0.65-inch Single chip Digital Micromirror Device (DMD)
Pixels: 1920 x 1080 = 2073600 pixels
Colors 16770000 colors
Projection lens F 2.4-2.8, f = 20.6 - 30.1 mm
Light source lamp 280 W
Picture size 40 - 300 inch (Wide) (aspect ratio 16:9)
PC compatibility
Maximum resolution: 1920 x 1080 dots (Compressed in the case of 1600 x 1200 dots)
Panel resolution: 1920 x 1080 dots
Video compatibility
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM / PAL-60
Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p, 1080p)
Speaker 10 W Mono, Round type ø5 cm x 1
S-video input
Luminance signal: 1.0 Vp-p 75 (negative sync.)
Chroma signal: 0.286 Vp-p 75 (burst signal)
Video input 1.0 Vp-p 75 (negative sync.)
Audio input 350 mVrms, 10 k or more
Analog RGB input
RGB: 0.7 Vp-p 75 (negative sync.)
YPBPR/YCBCR : Y:1.0 Vp-p (negative sync.) PBPR/CBCR:0.7 Vp-p
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
HDMI input
HDMI 19-pin
HDMI interface (TMDS single link) (only PCM audio is supported)
Control connector Serial terminal (RS-232C) (Mini DIN)
Outside dimensions 345 x 129 x 270 mm (width x height x depth)
Weight Approx. 3.8 kg
Length of power cord 114 inch (1.8 m)
Temperature, humidity
(performance guaranteed)
+41°F (+5°C) - +95°F (+35°C), 30 - 90%
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46

Comments to this Manuals

No comments