Mitsubishi PJLink FD630U User Manual download pdf (Page 32)

EN-32

Advanced features

Setting of the image displayed during startup

or muting

You can display your desired image as the startup screen (or splash

screen). Using the menu, you can also use such image as a back-

ground that is displayed while the video is muted or no signal is sup-

plied.

Important:

• You can’t set IMAGE CAPTURE when PASSWORD FUNCTION in

the FEATURE menu has been set to SPLASH ID SCREEN to

enable the password lock.

• You can’t set IMAGE CAPTURE when the component video signal

is inputted.

Setting procedure

1. Press the COMPUTER button to select the image supplied to

the COMPUTER/COMPONENT VIDEO IN terminal.

2. Display your desired image.

3. Display the INSTALLATION menu.

4. Select IMAGE CAPTURE by pressing the S or T button.

5. Press the ENTER button.

• The setting menu will be displayed.

Set the background color

(Set the background color only when you set the image size to x1 or

x4.)

6. Select BACK COLOR by pressing the S or T button.

7. Select your desired color for the background (GRAY, RED,

GREEN, BLUE, BLACK, WHITE, RED50%, GREEN50%, or

BLUE50%) by pressing the W or X button.

Set the image size

8. Select SIZE by pressing the S or T button.

9. Select x1, x4, or FULL by pressing the W or X button.

Capture the image

10. Select CAPTURE by pressing the S or T button.

11. Press the ENTER button.

• A red frame appears. (The size of the red frame is 640 x 360

pixels.)

12. Adjust the size of the image to be captured so that such image

stays within the red frame.

• Press the S, T, W or X button to move the red frame.

• You can’t move the red frame outside the screen.

13. Press the ENTER button twice.

• Image capture will start.

• Press the MENU button to cancel the procedure.

• When the image capture completes, the captured image will

be displayed for a few seconds.

Important:

• You can’t change the new startup screen back to the original star-

tup screen. (Even when you select RESET ALL in the FEATURE

menu, the factory default screen isn’t available any longer.) When

you want to change the startup screen again, capture another

image.

• The captured image will be displayed from the next startup. If the

captured image isn’t displayed, make sure that the setting of

SPLASH SCREEN in the INSTALLATION menu isn’t OFF. (See

page 22.)

• To display the captured image while the video is muted, set AV

MUTE MODE in the INSTALLATION menu to IMAGE. (See page

22.)

• When BACK COLOR in the INSTALLATION menu is set to

IMAGE, the captured image will be displayed while no signal is

supplied.

• In the mute mode, or when no signal is input, it takes longer time

to display the captured image.

• Some images can’t be captured correctly because of their signal

type.

Split

You can split the screen in two and display a computer image on the

left screen and a video image on the right screen.

To use the split mode:

1. Display the FEATURE menu.

2. Select SPLIT by pressing the S or T button.

3. Press the ENTER button.

• The screen is split in two and the left and right screens dis-

play the following images:

- Left screen: Image supplied to the last selected input

source, COMPUTER1, COMPUTER2, or

HDMI

- Right screen: Image supplied to the last selected input

source, VIDEO or S-VIDEO

• When you press the MENU button, the screen is displayed in

the normal mode.

• In the split mode, audio of the left screen is output.

• In the split mode, the picture quality settings of the input

source in the normal mode to be displayed on the left screen

are reflected on the entire screen.

• When no signal is input, a blue screen is displayed.

• When you input an interlace signal to the left screen, the dis-

played image may shake up and down slightly, but this is not

a malfunction.

x1 x4 FULL

CAPTURE : ENTER + ENTER

CANCEL : MENU

CAPTURE : ENTER + ENTER

CANCEL : MENU

CAPTURE : ENTER + ENTER

CANCEL : MENU

CAPTURE : ENTER + ENTER

CANCEL : MENU

.82:&

CAPTURING IMAGE !

Left screen

Right screen

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

Comments to this Manuals

No comments

Mitsubishi PJLink FD630U User Manual Page 32

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi PJLink FD630U