Mitsubishi XD20A User Manual download pdf (Page 2)

E – 2

Precautions

Please read this manual carefully before using your Data Projector and keep the manual handy for future reference.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED MITSUBISHI SERVICE PERSONNEL.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EX-

POSE THIS UNIT TO RAIN OR MOISTURE. DO

NOT USE THIS UNIT’S GROUNDED PLUG

WITH AN EXTENSION CORD OR IN AN OUT-

LET UNLESS ALL THREE PRONGS CAN BE

FULLY INSERTED. DO NOT OPEN THE CABI-

NET. THERE ARE HIGH-VOLTAGE COMPO-

NENTS INSIDE. ALL SERVICING MUST BE

DONE BY QUALIFIED MITSUBISHI SERVICE

PERSONNEL.

Important Safeguards

These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

•For best results, use the unit in a darkened room.

• Place the unit on a flat, level surface in a dry area away from dust

and moisture.

• Do not place the unit in direct sunlight, near heaters or heat

radiating appliances.

• Exposure to direct sunlight, smoke or steam can harm internal

components.

• Handle the unit carefully. Dropping or jarring can damage inter-

nal components.

•Do not place heavy objects on top of the unit.

Power Supply

• The unit is designed to operate on a power supply of 100 to 120

and 220 to 240 V 50/60 Hz AC. Ensure that your power supply

fits these requirements before attempting to use the unit.

•For PLUGGABLE EQUIPMENT, the socket-outlet shall be

installed near the equipment and shall be accessible.

• Handle the power cable carefully and avoid excessive bending. A

damaged cord can cause electric shock or fire.

•Disconnect the power cable (mains lead) from the power outlet

after using the unit.

Before disconnecting the power cable, make sure that the

POWER indicator lights in amber (not blinking or in green).

IMPORTANT SAFETY INFORMATION

This symbol warns the user that uninsulated voltage within the unit may have sufficient

magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with

any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and mainte-

nance of this unit has been included. Therefore, it should be read carefully in order to avoid

any problems.

The above cautions are given on the bottom of the product.

WARNING

This is a class A product. In a domestic environment this

product may cause radio interference in which case the user

may be required to take adequate measures.

RF Interference

WARNING

The Federal Communications Commission does not allow

any modifications or changes to the unit EXCEPT those

specified by MITSUBISHI Technologies in this manual.

Failure to comply with this government regulation could

void your right to operate this equipment.

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required

to correct the interference at his own expense.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class A digital apparatus complies with Canadian ICES-003.

1 2 3 4 5 6 7 ... 34 35

Comments to this Manuals

No comments

Mitsubishi XD20A User Manual Page 2

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi XD20A