Mitsubishi CP30DW Instruction Manual download pdf (Page 13)

CONNECTIONS

PRECAUTIONS

FEATURES

PREPARATION

TROUBLE-

SHOOTING

OTHERS

TECHNICAL DESCRIPTION

The supplier will make available on request such circuit diagrams, component part lists,

descriptions, calibration instructions or other information which will assist the User’s appropriately

qualified technical personnel to repair those parts of the EQUIPMENT which are classified by the

manufacturer as repairable.

The use of ACCESSORY equipment not complying with the equivalent safety requirements of

this equipment may lead to a reduced level of safety of the resulting system. Consideration

relating to the choice shall include:

- use of the accessory in the PATIENT VICINITY

- evidence that the safety certification of the ACCESSORY has been performed in accordance to

the appropriate EN60601-1 and/or EN60601-1-1 harmonized national standard.

The transportation and storage environmental conditions are:

Temperature : -20°C - +60°C (-4°F - +140°F)

Humidity : 30%-80% RH

Atmospheric pressure : 50 kPa - 106 kPa

Note : The above transportation environmental conditions indicate the storage

environmental conditions during transport.

OTHER CAUTIONS

Dust or other foreign matter adhering to the print paper or the ink ribbon, or deformation resulting

from exposure to extremely low or high temperatures could cause loss of color, uneven color or

lines, or wrinkles in the print images.

Turn off the power of this unit after completing auto loading/ejecting of the ribbon cartridge.

NOTE:

MEMORIZED IMAGES ARE STORED IN VOLATILE MEMORY AND MAY BE LOST IN THE

EVENT OF POWER FLUCTUATION OR MALFUNCTION.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Mitsubishi CP30DW Instruction Manual Page 13