Mitsubishi CP30DW Instruction Manual download pdf (Page 27)

CONNECTIONS

PRECAUTIONS FEATURES

PREPARATION

TROUBLE-

SHOOTING

OTHERS

2 Use the troubleshooting chart to resolve problem in operation. If you are unable to

resolve the problem, unplug the power cord and contact your dealer.

Symptom Check and Remedy

The power is not turned on. Is the power cord plug disconnected from the outlet?

→ Connect the power cord plug to the outlet firmly.

After tuning the power off, wait for approx. 2

minutes. Then turn on the power.

The image is not printed. Is the image data sent to this unit?

Is the ribbon cartridge or print paper exhausted?

→Check the status.

Is the paper cassette loaded correctly?

→

Check the status display. Refer to “INDICATION ON

THE STATUS DISPLAY & COUNTERMEASURES”.

(page 17)

Is the status indicator blinking?

→When the status indicator ( ) keeps blinking

slowly, the temperature of the thermal head may

get high. Wait until the temperature drops to a

level where printing becomes available.

This unit does not print any images sent Is the power of this unit turned on?

from the computer. Are this unit and a computer connected correctly?

→Check the status.

The ribbon cartridge can not be unloaded. →Turn off the power of this unit, then turn it on again

and press the RIBBON EJECT button. If this error

is not solved, contact your dealer.

The ribbon cartridge can not be loaded. Is the power of this unit turned on?

Is another ribbon cartridge already loaded in this

unit?

→ Check the status.

BEFORE CALLING FOR SERVICE

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Mitsubishi CP30DW Instruction Manual Page 27