Mitsubishi 1998E User Manual

DIAMOND VIEW 1998EColour Monitor19” (48cm) CRT Size18” (45.7cm) Viewable AreaUser’s Manual

6Selecting Functions and Making AdjustmentsContrast Hotkey1. Press to open the contrast adjustment display.2. Press or to adjust the contrast level

7Make adjustments1. In Main Menu: Pressor to select the function group with the itemthat you wish to change.2. Press Enter to open the Sub Menu.3.

8 5. Press Exit to save the setting and return to the main menu.1.LuminanceContrastchanges the difference between the light and darkareas of the d

9Unbalance adjusts the pincushion balance if both sides of theimage are bowed toward either the left or theright.Trapezoid makes the vertical edges of

104.Recall/Reset and Image StatusSelectand press Enter to recall the factory settings for the currentgraphics signal. The word “Recall” will blink on

11Note: The setting of each parameter is represented by a numeric value andcorresponding scale. The on-screen menu will automatically disappear af

12Factory Preset TimingsMode Resolution VerticalFrequency (Hz)HorizontalFrequency (kHz)Industry 640 x 400 70 31.47Industry 640 x 480 60 31.47VESA 800

1366 TroubleshootingIf you encounter any trouble using the Diamond View 1998E monitor, makesure that your monitor is properly installed. (For hardwar

14- Remove any magnetic objects that are near the monitor. Theseinclude speakers and power supplies (AC adaptors).Colours are impure.- Check that th

1577 SpecificationsModel Diamond View 1998EDisplay CharacteristicsDisplay Type19” (48 cm) diagonal cathode raytubeMaximum Viewable Size18” (45.7cm) d

UG/MO1998E/0902/1Diamond View is a registered trademark of Mitsubishi Electric Australia Pty. Ltd.Microsoft and Windows are registered trademarks of M

16User InterfaceControlsMains power switch, On-ScreenDisplay with 4 control buttonsOn-Screen Display Functions:Contrast; Brightness; Vert. & Hor.

1788 Service ContactsIf problems remain after checking this manual, please contact your place ofpurchase or contactAustralian Service ContactsVisit t

18Victoria and Tasmania4 / 303 Burwood HwyEast Burwood, Vic, 3151Telephone: (03) 9262-9899Fax: (03) 9262-9850Western Australia5 / 329 Collier RoadBass

iTable of Contents1 Important Safety Instructions...12 Features ...

iiCopyright NoticeCopyright 2002, Mitsubishi Electric Australia Pty. Ltd. All rights reserved. Nopart of this publication may be reproduced, transmitt

111 Important SafetyInstructionsPlease read the following safety instructions before installing or cleaning yourDiamond View monitor:1. This monitor

222 FeaturesYour Diamond View 1998E Monitor has the following features:♦ Plug and Play CompatibilityWith DDC-2B, the 1998E is compatible with the P

333 Unpacking the MonitorPlease check that the following items are included with your monitor. If theyare missing or damaged, please contact your pla

43. Connect the computer end of the D-SUB cable to the 15-pin outputconnector on the video board of yourcomputer.4. Turn the monitor and the compute

555 Adjusting the MonitorEnterExit1 2 3 4 5 You can adjust the monitor using its On-Screen Display (OSD) m