Mitsubishi Diamond Plus 200 User's Guide download pdf (Page 7)

- 7 -

ENGLISH

PRESET Polarity

TIMING Fh(kHz) Fv (Hz) H V

640 x 480 N.I. 31.5 60.0 – –

800 x 600 N.I. 53.7 85.1 + +

1024 x 768 N.I. 60.0 75.0 + +

1024 x 768 N.I. 68.7 85.0 + +

1152 x 870 N.I. 68.7 75.1 – –

1280 x 1024 N.I. 80.0 75.0 + +

1280 x 1024 N.I. 91.1 85.0 + +

1600 x 1200 N.I. 93.8 75.0 + +

1600 x 1200 N.I. 106.3 85.0 + +

1.3 Power Management Function

The monitor has a power management function which

reduces the power consumption of the monitor when not

in use.

Power saving mode is invoked by a VESA DPMS-

compliant computer. Check your computer's manual for

setting this function.

1.4 DDC

The monitor includes the VESA DDC

1 and DDC

feature. DDC (Display Data Channel) is a communication

channel over which the monitor automatically informs the

computer system about its capabilities (e.g. each sup-

ported resolution with its corresponding timing).

DDC is routed through previously unused pins of the 15-pin

VGA connector.

The system will “Plug and Play” if both monitor and com-

puter implement the DDC protocol.

CAUTION

1.5 Location Considerations

When setting up and using the monitor, keep the following

in mind:

• For optimum viewing, avoid placing the monitor

against a bright background or where sunlight or

other light sources may reflect on the display area of

the monitor. Place the monitor just below eye level.

• Place the monitor away from strong magnetic or

electromagnetic fields, such as high capacity trans-

formers, electric motors, large current power lines,

steel pillars, etc....

Magnetism can cause distortion in the picture and/or

color purity.

• Avoid covering the slots or openings of the monitor.

Allow adequate ventilation around the monitor so the

heat from the monitor can properly dissipate. Avoid

putting the monitor into any enclosure that does not

have adequate ventilation.

• Avoid exposing the monitor to rain, excessive mois-

ture, or dust, as this can cause a fire or shock hazard.

• Avoid placing the monitor, or any other heavy object,

on the power cord. Damage to the power cord can

cause a fire or electrical shock.

• When transporting the monitor, handle it with care.

1.6 Cleaning Your Monitor

When cleaning the monitor, please follow these guidelines:

• Always unplug the monitor before cleaning.

• Wipe the screen and cabinet front and sides with a

soft unspoil cloth to prevent causing imperfections.

• If the screen requires more than dusting, apply

water or neutral detergent to a soft cloth to clean the

monitor screen.

•

Do not use benzene, thinner or any volatile sub-

stances to clean the unit as the finish may be

permanently marked.

•

Never leave the monitor in contact with rubber or

vinyl for an extended time period.

•

Do not spray directly on the screen as cleaner may

drip into the monitor and damage the circuitry.

•

Never use an abrasive cleaner on the screen sur-

face as this will damage the anti-reflection coating.

1.2 Internal Preset Memory Capability

To minimize adjustment needs, the factory has preset

popular display standards into the monitor, as shown in

Table 1. If any of these display standards are detected, the

picture size and position are automatically adjusted. All of

the factory presets may be overwritten by adjusting the user

controls. This monitor is capable of automatically storing up

to 15 additional display standards. The new display infor-

mation must differ from any of the existing display stan-

dards by at least 1kHz for the horizontal scan frequency or

1Hz for the vertical scan frequency or the sync signal

polarities must be different.

Table 1. Memory Buffer Factory Presets

Mode Power Power-On Indicator

Normal 140 W Green

Power Saving Mode 5 W Amber

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Comments to this Manuals

No comments

Mitsubishi Diamond Plus 200 User's Guide Page 7

Comments to this Manuals

Related products and manuals for TVs & monitors Mitsubishi Diamond Plus 200