Diamond Digital DV191/B Colour TFT LCD Monitor 19” (48 cm) LCD Panel Size
6 6Connecting the AC Power 1. Connect the power cord to the AC socket. (See Fig. 1-4) 2. Connect the power cord to an AC power source.
7 755 Windows driver Installation The DV191 is fully Windows Plug and Play compatible so no specific Windows drivers are required for installation.
8 866 Setting the Display Resolution Choosing The Best Resolution All Liquid Crystal Displays (LCDs) have a fixed resolution that is the same as th
9 9If you are using an Apple Macintosh, change the resolution by doing the following: MacOS 8.x/9.x 1. Click the Apple icon at the top, left corner
10 10able to support these modes. For the native resolution of 1280 x 1024 pixels, for example, refresh rates of 60, 70 and 75 Hertz are supported. W
11 11 Table 1 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timi
12 1277 Adjusting the Monitor User Controls A brief description and the location of all LCD Monitor function controls and indicators:
13 136 Adjustment Control Buttons Press the left button to decrease the OSD setting and press the right button to increase the OSD setting, when OSD
14 14 OSD Transparency This function let's you set the transparency of the OSD menu (Not available when using DVI). Phase This lets you adjust
15 15Picture Optimisation The easiest way to obtain an optimal picture is by using the Auto function in the OSD menu. This only works reliably if the
Copyright 2004, Mitsubishi Electric Australia Pty. Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribe
16 166. With the Clock set to the optimal value adjust the Phase to further optimise the displayed image. You should now be able, with a combination
17 1788 Frequently Asked Questions The image is blurred, how can I get the best quality picture? ♦ Read chapter 6, Setting the Display Resolution,
18 18 No image is displayed, what can I do? ♦ Check that the light (LED) next to the monitor’s power button is lit and is green in colour. If the LE
19 1999 Specifications Model: Diamond View DV191 Display Characteristics Display Type 19“ active matrix Thin Film Transistor Liquid Crystal Displ
20 20Input Signal Line Frequency 24 – 80kHz multi-frequency Image Frequency (Refresh Rate) 56 - 76Hz Video Signal RGB analogue (Positive polarit
21 211100 Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact: Australian Service Cont
22 22 Victoria and Tasmania 4 / 303 Burwood Hwy East Burwood, VIC, 3151 Telephone: (03) 9262-9899 Fax: (03) 9262-9850 Western Australia 5 / 329 Co
i Table of Contents 1 Important Safety Instructions ...1 12 Features...
ii Disclaimer Mitsubishi Electric Australia Pty. Ltd. makes no representations or warranties, either expressed or implied, with respect to the conten
1 111 Important Safety Instructions Please read the following safety instructions before installing or cleaning your Diamond Digital monitor: 1. U
2 222 Features Your DV191 Monitor features: ♦ XGA (1280 x 1024 pixel) Resolution LCD Panel ♦ High Brightness Level – 300 cd/m2 (typical) ♦ High Cont
3 333 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact you
4 4 Power Cord Audio Cable Locate the model name and the ser
5 544 Hardware Installation Connecting the Monitor Base Remove the base from the packing box and place it on the desk. Next, remove the LCD displa
Comments to this Manuals