Mitsubishi LCD1700V User Manual download pdf (Page 10)

english – 4 User’s Manual

Installation

To install the monitor to your host system, please follow the steps as given below:

Steps

1. Open the connector cover first.

2. And then open the cable cover.

3. Connect Video Cable

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the video cable to the computer first, then to the monitor.

4. Connect power cord

Check first to make sure that the power cord you use is the correct type required for your area. Connect the

AC Adapter cord to the monitor.

Connect the power cord to the AC Adapter, then to a properly grounded AC outlet.

5. Assemble the cable cover.

6. Cover the connector cover.

7. Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.

This sequence is very important.

8. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the

problem.

Connector Cover Cable Cover

(This semi-circle opening is the Cables outlet)

PULL

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 139 140

No comments

Mitsubishi LCD1700V User Manual Page 10