Mitsubishi SL25U User Manual download pdf (Page 33)

10)

Menu setting commands (Not executable in stand-by mode, while the Splash screen is projected or the MUTE is executed.)

The menu setting commands are used for the menu setting of this projector. If the personal computer sends the

command without attaching the data code, the projector attaches to the received command it’s current setting

value as the data code and send it back to the PC.

ITEM ASCII HEX VALUE

CONTRAST

P 50h ±30±30±30 (R from G+Main data+B from G)

BRIGHTNESS

Q 51h ±30±30±30 (R from G+Main data+B from G)

sRGB SRGB 53h 52h 47h 42h 0 (OFF), 1 (ON)

COLOR MATRIX (MODE)

CMT 43h 4Dh 54h 1 (VIDEO), 2 (COMPUTER), 3 (USER), 4 (OFF)

COLOR MATRIX (R, G, B)

MRGB 4Dh 52h 47h 42h ±30±30±30 (R+G+B)

COLOR MATRIX (Y, C, M)

MYCM 4Dh 59h 43h 4Dh ±30±30±30 (Y+C+M)

COLOR MATRIX (SATURATION)

MSAT 4Dh 53h 41h 54h ±05

COLOR MATRIX (RGB-TINT)

MT 4Dh 54h ±20

COLOR TEMP. A 41h 1 (STANDARD), 2 (HIGH), 3 (LOW), 4 (USER)

COLOR T 54h ±10

TINT S 53h ±10

SHARPNESS R 52h ±10

GAMMA MODE GS 47h 53h 0 (DYNAMIC), 1 (STANDARD), 2 (THEATER), 3 (AUTO)

RIS AI 41h 49h 0 (OFF), 1 (1), 2 (2), 3 (3)

AUTO POWER ON APON 41h 50h 4Fh 4Eh 0 (OFF), 1 (ON)

AUTO POWER OFF APOF 41h 50h 4Fh 46h 00 (OFF) , 05, 10, 15, 30, 60

SPLASH SCREEN SS 53h 53h 0 (OFF), 1 (ON)

BACK COLOR BB 42h 42h 0 (BLACK), 1 (BLUE), 2 (LOGO)

MUTE MODE MM 4Dh 4Dh 0 (BLACK), 1 (LOGO)

LAMP MODE LM 4Ch 4Dh 0 (STANDARD), 1 (LOW)

IMAGE REVERSE IR 49h 52h

0 (OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR, INVERT)

MENU POSITION MP 4Dh 50h 0 (Upper left), 1 (Lower right)

EXPAND MODE EX 45h 58h 1 - 4

FRAME POSITION FM 46h 4Dh 1 - 5

VIDEO SIGNAL VS 56h 53h 0 (AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) ,

4 (4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)

SCART SRT 53h 52h 54h 0 (OFF), 1 (ON)

ANAMORPHIC SC 53h 43h 0 (OFF), 1 (CENTER), 2 (UPPER), 3 (LOWER)

3D CineView LD 4Ch 44h 0 (OFF), 1 (ON)

LANGUAGE LG 4Ch 47h

0 ( ), 1 (English), 2 (Español), 3 (Deutsch) , 4 (Français),

5 (Italiano),6 ( ), 7 ( ), 8 ( ), 9( )

RESET ALL

RSTALL

52h 53h 54h 41h 4Ch 4Ch

MEMORY CALL MMC 4Dh 4Dh 43h 0 (AUTO), 1 (USER1), 2 (USER2)

HORIZ. POSITION HP 48h 50h + (increase), – (decrease)

VERT. POSITION VP 56h 50h + (increase), – (decrease)

FINE SYNC. FN 46h 4Eh 00 - 39

TRACKING TRK 54h 52h 4Bh + (increase), – (decrease)

COMPUTER INPUT CIN 43h 49h 4Eh 0 (RGB), 1 (YCBCR/YPBPR)

HOLD HLD 48h 4Ch 44h 0 (AUTO), 1 (ON), 2 (OFF)

HOLD BEGIN HLB 48h 4Ch 42h –01 - –99

HOLD END HLE 48h 4Ch 45h 01 - 99

CLAMP POSITION CLP 43h 4Ch 50h 00 - 63

CLAMP WIDTH CLW 43h 4Ch 57h 01 - 63

HORIZ. PIXELS HPL 48h 50h 4Ch 0000 - 9999

VERT. LINES VLN 56h 4Ch 4Eh 0000 - 9999

VERT. SYNC. VSC 56h 53h 43h 0 (AUTO), 1 (ON), 2 (OFF)

SHUTTER (U) SHU 53h 48h 55h 000 - 383 (000-299 : For SL25U)

SHUTTER (L) SHL 53h 48h 4Ch 000 - 383 (000-299 : For SL25U)

SHUTTER (LS) SHLS 53h 48h 4Ch 53h 000 - 510 (000-398 : For SL25U)

SHUTTER (RS) SHRS 53h 48h 52h 53h 000 - 510 (000-398 : For SL25U)

*1) When sRGB is ON, only the main data are effective.

• Some commands are not executed depending on the input signal. The operational restrictions same as

those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.

1 2 ... 28 29 30 31 32 33 34

Comments to this Manuals

No comments

Mitsubishi SL25U User Manual Page 33

Comments to this Manuals

Related products and manuals for Data projectors Mitsubishi SL25U