149
OPERATING PROCEDURE
PHOTOS
2. Removing the fan motor
(1) Remove the top panel, the service panel, and the cabinet
(Photo 1, 2).
(2) Disconnect the connector CN931 and CN932 on the outdoor
electronic control P.C. board.
(3) Remove the propeller.
(4) Remove the fan motor.
Photo 6
Screws of the outdoor fan motor
Propeller
Propeller nut
Separator
Sound
proof
felt
Photo 3
Screws of
the electrical
parts
Photo 4
R.V. coil
4 way valve
LEV coil E
Expansion valve E
Suction pipe
welded part
Discharge
pipe welded part
Photo 5
Compressor nuts
Screw of
the rear guard
Screw of the
back panel
Screws of
the back panel
Screws of
the back panel
Screw of the
back panel
Comments to this Manuals