Mitsubishi WS-73909 Service Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Page 24
MODELS: WS-55859 / WS-55909 / WS-65869 / WS-65909 / WS-73909
Circuit Adjustment Mode
Most of the adjustments can only be performed using the remote hand unit. Many of the adjustments must be
performed in both the 480i and 1080i modes. Video/Color adjustments must be performed in the 480i and
1080i modes, and data must be preset in the 480P (DVD) and VGA modes.
Note: Set the Remote Operational Mode to NetCommandTM. (Hold the Power button and press
9-3-5 in sequence.) This slows the remotes response and makes adjustments easier. When
adjustments are complete, set the Remote to its original Operational Mode.
A. Activating the Circuit Adjustment Mode
The current signal source determines if the
activated Adjustment Mode is 480i or 1080i.
1. Select the signal source (480i or 1080i).
2. Press the "MENU" button on a remote hand unit.
3. Press the number buttons "0", "1", "5", "7" in sequence. The
screen will change to the Adjustment Mode.
Note: Repeat steps 1 and 2 if the circuit
adjustment mode does not appear
on screen.
B. Selection of adjustment Functions and
Adjustment Items
To select an adjustment item in the circuit adjustment mode, first select the adjustment function that includes
the specific adjustment item to be selected. Then select the adjustment item. Refer to the following pages for
the listing of adjustment functions and adjustment items.
1. Press the "AUDIO" button on a remote hand unit to select an adjustment function. Each time the button
is pressed, the Function changes in the following sequence:
2. Press the VIDEO button to select a specific Adjustment Item. The Item number increases each time the
VIDEO button is pressed.
C. Changing Data
After selecting an adjustment Item, use the ADJUST UP/DOWN button to change data.
Press ADJUST DOWN to decrease the data value.
Press ADJUST UP to increase the data value.
D. Saving Adjustment Data
Press ENTER to save adjustment data in memory. The character display turns red for approximately one
second in this step.
Note: If the circuit adjustment mode is terminated without pressing ENTER, changes in adjustment data
are not saved.
VC JNGL
AUD SNTS MNTS
Adjustment Functions
Previous Models V19 Chassis
Video/Chroma VC
Jungle JNGL
Main Matrix MNTS
Sub Matrix SNTS
Audio AUD
Ad
j
ustment Function Name Chan
g
es
CHASSIS
V19
MODE
0
ADJ ITEM
1 SCT 42 480i
SIGNAL
ABBREV. DATA
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 69 70

Comments to this Manuals

No comments