Mitsubishi SC-SL3NA-AE Installation Manual download pdf (Page 29)

–28–

Corrections for Power Outages

In case the blackout continues more than 48 hours, the clock inside will stop and the operation of each group

cannot follow any schedule settings. Please reset the clock.

In case the blackout continues less than 48 hours, you do not have to reset the clock, and each group will run/

stop according to the following rule.

When the power returns, the operation of each group will follow the closest schedule setting before the power returns.

In case there are no settings in the closest schedule setting, it will follow the second closest schedule setting.

In case there are no schedule settings on that day, this center console will not send any operation signal to each group.

Using USB Memory (SC-SL3N-BE only)

Attention

• Be sure to use bundled USB memory.

• Be sure to perform these operations after inserting the USB memory into the unit.

Page 4

• The calculating data for twelve months are saved. Please save it to a PC through the USB memory

within twelve months.

• Please do not operate while the display light of the USB memory is blinking fast.

You may perform your operations or remove the USB memory only when the display light is blinking

slowly.

If the USB memory you use does not have a red blinking light, please wait for a moment after each operation.

Remove the USB memory only after all operations have been completed.

It is convenient if folders are created in the USB memory in advance.

1. Press IMPORT EXPORT button on the MAIN MENU.

Page 7

2. Press the “Export monthly data files to USB” button.

Select the folder on the Folder Selection screen.

[Import/Export screen]

[Folder Selection screen]

3. Press the folder to be selected.

To change the page, press the PREV or NEXT button.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Mitsubishi SC-SL3NA-AE Installation Manual Page 29