Mitsubishi Mr.Slim MSZ-A12NA Operations Instructions

SPLIT-TYPE AIR CONDITIONERSOPERATING INSTRUCTIONSMSZ-A09NAMSZ-A12NAMSZ-A15NAMSZ-A17NAThank you very much for purchasing this Mitsubishi room air condi

10WHEN THE AIR CONDITIONER IS NOT GOING TO BEUSED FOR A LONG TIMEWhen it is not going to be used for a longtime:1 Perform the FAN operation for 3 or 4

11CLEANING THE AIR FILTER (CATECHIN)Cleaning the air filter (about once every 2 weeks)3 After washing with water/lukewarm water, drythe air filter wel

121 Remove the air filter (left one).The air cleaning filter is not attached to the right sideair filter.2 Pull up the tabs on both sides of the air c

13BEFORE CONTACTING THE SERVICE REPRE-SENTATIVE, CHECK THE FOLLOWING AGAINQuestionThe air conditioner cannotbe operated for about 3 min-utes when rest

14INSTALLATION, RELOCATION AND INSPECTIONInstallation placeAvoid installing the air conditioner in the following places.• Where flammable gas could le

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODAKU, TOKYO 100-8310, JAPANSG79Y636H01

2•This air conditioner is NOT intended for use by children or infirm persons without supervisions.SAFETY PRECAUTIONS• Since rotating parts and parts w

3SAFETY PRECAUTIONS NAME OF EACH PARTIndoor unitOutdoor unitAir cleaning filter(Anti-Allergy EnzymeFilter, Blue bellowstype)Vertical vaneOperation sec

4(This diagram shows an overall view.)NAME OF EACH PARTRemote controllerPREPARATION BEFORE OPERATIONAuto restart function These models are equipped wi

5HR.Remote controllerHow to set the batteries and the current time1 Remove the front lid and insert batteries.Then reattach the front lid.Insert the m

6To select the AUTO mode:1 Press the ON/OFF button.2 Select the (AUTO) mode by pressing the MODE button.Each time this button is pressed, the operat

7To select the COOL, DRY or HEAT mode:1 Press the ON/OFF button.2 Select the operation mode by pressing the MODE button.Each time this button is press

8AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT To change the horizontal direction of the air flow, move the vertical vane manually.Adjust the vane before

9ECONO COOL OPERATIONUse this operation when you want to be comfortable in COOL mode even with energy saved.Perform the following operations while the