Mitsubishi MDT652S Specifications download pdf (Page 46)

English-46

OFF H FLIP

Horizontally

rotated

V FLIP

Vertically

rotated

OSD screen functions (continued)

CONFIGURATION2



CAT5 CONTROL

[CAT5 CABLE LENGTH]

Select the cable length, and the defaults of all the

adjustment values are automatically determined.

Select the length that is closest to the actual length of your

cable.

[CAT5 EQ]

Make adjustment so that blur and smear of the displayed

letters and graphic objects are minimized.

[CAT5 R-GAIN, G-GAIN, B-GAIN]

When the displayed image is dark, increase each value.

When whites aren’t displayed as intended, adjust the

R-GAIN and B-GAIN values.

NOTE: Before performing the color adjustment described

above, check the TINT settings on page 37.

[

CAT5 R

-SKEW, G-SKEW, B-SKEW]

Adjust each value so that the color deviation in the

displayed letters and graphic objects is minimized.



SERIAL CONTROL

Select the communication interface (RS-232C or RS-485)

for the serial communication function.

For connection of the signal cable, see page 35.



RS485 TERMINATION

Turn ON or OFF the termination resistance of the RS-485

interface.

ON: Select this setting to use the monitor alone or to

conﬁ gure the monitor as the one at the end of the

connection when more than one monitor is multi-

connected.

OFF: Select this setting to conﬁ gure the monitor as other

than the one at the end of the connection when more

than one monitor is multi-connected.



LAN SETTING

DHCP CLIENT

Select whether to use DHCP (-) client or not.

Select OFF when not using it, and select ON when using

it.

IP ADDRESS

Set the IP address of the monitor.

SUBNET MASK

Set the gateway mask.

Set it to 255.255.255.0 for normal use.

DEFAULT GATEWAY

Set the IP address of the gateway router to externally

connect the local area including the monitor.

RESET

LAN settings are reset.



MONITOR ID

ID numbers for wireless remote control are assigned to

MDT651S monitors that are multi-connected via RS-232C.

ID numbers 1 to 26 are selectable.



OSD TURN OFF

The OSD control menu will stay on as long as it is used.

The preset choices are 5 -120 seconds.



OSD H POSITION

You can adjust the horizontal position of the OSD menu.



OSD V POSITION

You can adjust the vertical position of the OSD menu.



OSD ROTATION

The OSD screen is rotated.



INFORMATION OSD

You can enable and disable the information OSD display.

The display time is selectable from 1 to 10 seconds.

NOTE: The information OSD display shows a message

when the input source is switched, the input signal

state is changed, or the input signal has an error.



OFF TIMER

You can select the OFF TIMER mode.

Select the time period to automatically turn off the power

from 1 to 24 hours.

NOTE: When OFF TIMER is enabled, the SCHEDULE

settings (see page 29) will be disabled.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 56 57

Comments to this Manuals

No comments

Mitsubishi MDT652S Specifications Page 46

Comments to this Manuals

Related products and manuals for TVs & monitors Mitsubishi MDT652S