Mitsubishi MDT652S Specifications download pdf (Page 48)

English-48

OSD screen functions (continued)

ADVANCED OPTION



INPUT RESOLUTION

* For the RGB3 and RGB4 inputs only.

You can select the following resolutions according to

the input signal: AUTO, 1024x768, 1280x768, 1360x768,

1400x1050, 1680x1050, 1600x1200, and 1920x1200. AUTO

selects the resolution automatically.

The setting you select becomes effective when POWER is

turned OFF and ON again.



BLACK LEVEL EXPANSION

Selects a level of black expansion from “OFF”, “MIDDLE”

and “HIGH.”

In case of go under the black cut-off level, please adjust the

“Black level” in moderation on OSD menu.



INPUT CHANGE

You can select the time for input switching from QUICK and

NORMAL.

NOTE: When you select QUICK, slight noise may appear.



SCAN MODE

* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO

inputs only.

You can select the image display area.

OVERSCAN: About 95% of the input image is displayed.

UNDERSCAN: Almost 100% of the input image is

displayed.



SCAN CONVERSION

* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO

inputs only.

You can select the IP conversion mode.

PROGRESSIVE: Interlace signals are converted into

progressive signals. Select this setting for

normal cases.

INTERLACE: Interlace signals are displayed without

being converted. Though this setting is

suitable for motion images, still images

aren’t displayed properly.



FILM MODE

You can select the ﬁ lm mode function.

AUTO: Images of 24 frames per second are detected,

subjected to interpolation, and then displayed.

OFF: The input video signals are displayed without being

subjected to any processing.

NOTE: When FILM MODE is AUTO, set SCAN CONVERSION

to PROGRESSIVE. See page 41.



IR CONTROL

You can lock the wireless remote control.

Select from the following two modes using the

and

buttons and then determine the selected mode by pressing

the SET button.

NORMAL: All the remote control operations are enabled.

LOCK: All the remote control operations are disabled.

NOTE: When you hold down the DISPLAY button on the

wireless remote control for at least 5 seconds, the

NORMAL mode is activated.

You can lock the wireless remote control

independently from the control buttons on the rear

of the monitor. See page 42.



TILING

You can enlarge an image across multiple screens.

A single large screen can be conﬁ gured with up to 25

monitors. You can also divide the displayed image into up

to 5 pieces horizontally and vertically.

NOTE: It is required to connect the same video signal to

each monitor via a distributor or RGB OUT.

When TILING is activated, PIP, POP, SBS, and STILL

are disabled.

TILING doesn’t work in the REAL picture size mode.

H MONITORS: Select the number of images obtained by

horizontal division.

V MONITORS: Select the number of images obtained by

vertical division.

POSITION: Select the area you want to enlarge.

FRAME COMP.: When displaying an image across multiple

monitors, you can select the mode to

compensate for the bezel widths for

smooth and natural display.

ENABLE: When you select ON, the image in the

selected area is enlarged on the screen.



HEAT STATUS

The statuses of the cooling fan, brightness, and internal

temperature are displayed.

NOTE: The cooling fan starts running according to the

operating temperature or when COOLING FAN is

ON in the SCREEN SAVER menu.

When the operating temperature substantially

exceeds the operation guaranteed range, the

message “TEMPERATURE WARNING!!” is displayed

on the screen.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 56 57

Comments to this Manuals

No comments

Mitsubishi MDT652S Specifications Page 48

Comments to this Manuals

Related products and manuals for TVs & monitors Mitsubishi MDT652S