Mitsubishi 4G6 Series 1991 Specifications download pdf (Page 62)

4G6 ENGINE (E-W) -

Rocker Arms and Camshaft

11A-8-3

INSPECTION

CAMSHAFT

(1) Measure the cam height.

Item Standard value mm Limit mm

GALANT Intake 37.39 36.89

Exhaust 37.14 36.64

SPACE Intake 37.39 36.89

WAGON

Exhaust 36.83 36.33

ROCKER ARM

(1) Check the roller surface. If any dents, damage or seizure

is evident, replace the rocker arm.

(2) Check rotation of the roller. If it does not rotate smoothly

or if looseness is evident, replace the rocker arm.

(3) Check the inside diameter. If damage or seizure is evident,

replace the rocker arm.

LASH ADJUSTERS

Caution

The lash adjusters are precision-engineered

mechanisms. Do not allow them to become

contaminated by dirt or other foreign substances.

Do not attempt to disassemble the lash adjusters.

Use only fresh diesel fuel to clean the lash

adjusters.

(1) Prepare three containers and approximately five liters

of diesel fuel. Into each container, pour enough diesel

fuel to completely cover a lash adjuster when it is standing

upright. Then, perform the following steps with each lash

adjuster.

(2) Place the lash adjuster in container A and clean its outside

surface.

NOTE

Use a nylon brush if deposits are hard to remove.

RevisedPWEE9616-A

Aug. 1998Mitsubishi Motors Corporation

Roller tip

Outside

cleaning

Inside

cleaning

Filling with

diesel fuel

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 107 108

Comments to this Manuals

No comments

Mitsubishi 4G6 Series 1991 Specifications Page 62

Comments to this Manuals

Related products and manuals for Engine Mitsubishi 4G6 Series 1991