Mitsubishi 4G6 Series 1991 Specifications Page 89

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 88
4G6 ENGINE (E-W) -
Front Case, Counterbalance Shafts and Oil Pan
11A-10-7
"
I
A
SEALANT APPLICATION TO OIL PRESSURE
SWITCH
(1) Coat the threads of switch with sealant and install the
switch using the special tool.
Specified sealant: 3M ATD Part No. 8660 or equivalent
Caution
D
Keep the end of the thread portion clear or sealant.
D
Avoid an overtightening.
"
J
A
FLANGE BOLT INSTALLATION
(1) Insert a Phillips screwdriver into a hole in the left side
of the cylinder block to lock the silent shaft.
(2) Secure the oil pump driven gear onto the left
counterbalance shaft by tightening the flange bolt to
specified torque.
"
K
A
PLUG INSTALLATION
(1) Install a new O-ring to the groove of front case.
(2) Using the special tool, install the plug and tighten to
specified torque.
"
L
A
OIL PAN INSTALLATION
(1) Clean both mating surfaces of oil pan and cylinder block.
(2) Apply a 4 mm wide bead of sealant to the entire
circumference of the oil pan flange.
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or
equivalent
RevisedPWEE9616-A
E
Aug. 1998Mitsubishi Motors Corporation
6EN0564
MD998162
MD998783
6EN0213
Bolt hole
portion
Groove
portion
Page view 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 107 108

Comments to this Manuals

No comments