Mitsubishi SC-SL2NA-E Specifications download pdf (Page 10)

’13 • SC-T-192

ø5 × 4

176

220

144

120

Installation

bracket (rear)

Pan-head

screw (M4)

Installation

bracket (front)

Installation

bracket (rear)

In the wall

Internal wall

Create a hole in the wall as shown in the ﬁgure above.

Be sure to check the dimensions required to correctly install

the unit.

Insert the installation bracket (rear) into the rear of the

wall through the hole, and secure the bracket.

Fasten the installation bracket (front) and installation

bracket (rear) as shown in the ﬁgure above.

The top and bottom of the brackets can be easily

identiﬁed. Be sure to check the “�UP” mark to install

it right side up.

In case of installing on the control box(1)

Please use the control box of the size of 300mm • × 400mm × 120mm

or larger.

Please be sure to lock the control box to protect persons from electric •

shock. Avoid usage of heat-retaining materials and heat-insulating

materials because these can result in heat buildup and adversely

affect the operation of the central control.

Caution

Please do not install devices that can cause the ambient ٨

temperature to rise in the same control box. Also, do not install

multiple controls in the same control box. These can cause

heat to build up and result in false operation. If multiple central

control must be installed in the same control box, take corrective

measures to ensure that the temperature in the control box does

not rise above 40°C such as by installing cooling fans.

500

100

Front of the central control

500mm or larger

Bottom of the central control

100mm or larger

In case of embedding in a wall(2)

Be sure to use the attached installation brackets. Alternatively, you

can use SLA3R-BX for SC-SL3N. Please be sure to use for protecting

persons from the electric shock. Please check that the sufﬁcient space is

available in the wall. When the inside of the wall is divided and have a

cavity, please create space more than 0.08m

. Refer to the table below.

If there is partition on the left, right, top and bottom of the central

control, please create a space that is 105mm or deeper.

a (height)

(mm)

b (width)

(mm)

c (depth)

(mm)

space (m

)

Example1 900 800 110 0.08

Example2 1800 400 110 0.08

Example3 1000 400 200 0.08

Minimum 600 or larger 400 or larger 110 or larger

105mm or

larger

Inner wall

materials

Beam of

building

Lead-in

cable

Partition

Internal

wall

Central

control

Installation Position

Install the central control so that the center of the screen will

be at the same height as the eye level of people who will

frequently use the unit.

The recommended position is that the center of the screen

becomes within +10, -30 degrees from eye level.

5cm

(30cm)

10°

Central control

30°

17cm

Please install the central control after turning off the power for fear of electric shock.

Please arrange or protect the wiring so that excessive force is not applied to the electrical wires.

Installation Place

Please install in an indoor location that is not exposed to electromagnetic waves, water, dust, or other foreign substances.

The operating temperature range of this product is from 0°C to 40°C.

Install in a location where the ambient temperature remains within the operating temperature range.

However, if the operating temperature range is exceeded, be sure to implement corrective measures such as installation of a cooling fan.

Be aware that continued usage of this central control outside the operating temperature range can result in operation problems.

Space Required for Installation

9. INSTALLATION WORK

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comments to this Manuals

No comments

Mitsubishi SC-SL2NA-E Specifications Page 10

Comments to this Manuals