Mitsubishi 4G9 series Specifications download pdf (Page 109)

www.mivec.co.nz

4G9 ENGINE (E-W) -

Rocker Arms and Camshafts

11A-8-8

PWEE9502

May 1995Mitsubishi Motors Corporation

(4) Apply sealant to the illustrated position of the cylinder

head upper surface.

Specified sealant:

Mitsubishi Genuine Part No. MD970389

or equivalent

(5) Install the beam camshaft cap before the sealant applied

becomes dry and hard.

(6) Tighten the bolts to the specified torque in the order shown

in the illustration.

M6 bolt 11Nm

M8 bolt 21Nm

Caution

The M8 bolts plated green cannot be reused. Always

replace such bolts with M8 bolts finished by glossy

plating which are available separately.

The M8 bolt finished by glossy plating is reusable;

if the caps have already been assembled with such

bolts, then reassemble the caps using them.

(7) Install the camshaft oil seal (use the special tool) and

the thrust case <DOHC- GDI for PAJERO io - 4G93>

before the sealant applied becomes dry and hard.

(8) Wipe off squeezed out excess sealant from the

circumference of the beam camshaft cap.

<DOHC-GDI for CARISMA (Up to 2000 model),

SPACE STAR (1999 model), SPACE RUNNER>

PWEE9502-H

July 2000Mitsubishi Motors Corporation Revised

Engine front side

<DOHC-GDI for CARISMA (From 2001 model),

SPACE STAR (From 2001 model), GALANT, PAJERO io>

<DOHC-GDI for CARISMA (Up to 2000 model),

SPACE STAR (1999 model), SPACE RUNNER>

Engine front side

<DOHC-GDI for CARISMA (From 2001 model),

SPACE STAR (From 2001 model), GALANT, PAJERO io>

MD998713

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 170 171

No comments

Mitsubishi 4G9 series Specifications Page 109