Mitsubishi 4G9 series Specifications download pdf (Page 115)

www.mivec.co.nz

4G9 ENGINE (E-W) -

Rocker Arms and Camshafts

11A-8-12

PWEE9502

May 1995Mitsubishi Motors Corporation

(6) Remove the lash adjuster from the container. Then, push

down the steel ball gently and push the plunger to eliminate

diesel fuel from the pressure chamber.

(7) Place the lash adjuster in container C. Then, gently push

down the internal steel ball using special tool MD998442.

Caution

Do not use container C for cleaning. If cleaning is

performed in container C, foreign matter could enter

the pressure chamber when chamber is filled with

diesel fuel.

(8) Stand the lash adjuster with its plunger at the top, then

push the plunger downward firmly until it moves through

its greatest possible stroke. Return the plunger slowly,

then release the steel ball and allow the pressure chamber

to fill with diesel fuel.

(9) Remove the lash adjuster from the container, then stand

the lash adjuster with its plunger at the top. Push the

plunger firmly and check that it does not move. Also,

check that the lash adjuster’s height matches that of a

new lash adjuster.

NOTE

If lash adjuster contracts, perform the operations (7)

through (9) again to fill it with diesel fuel completely.

Replace the lash adjuster if it still contracts after performing

these steps.

(10)Stand the lash adjuster upright to prevent diesel fuel from

spilling out. Do not allow the lash adjuster to become

contaminated by dirt or other foreign matter. Fit the lash

adjuster onto the engine as soon as possible.

Wire or MD998442

Diesel fuel

PWEE9502-G

May 2000Mitsubishi Motors Corporation Revised

Wire or MD998442

Diesel fuel

Wire or MD998442

Diesel fuel

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 170 171

Comments to this Manuals

No comments

Mitsubishi 4G9 series Specifications Page 115

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Mitsubishi 4G9 series