Mitsubishi 4G9 series Specifications download pdf (Page 46)

www.mivec.co.nz

4G9 ENGINE (E-W) -

Timing Belt

11A-4-9

PWEE9502

May 1995Mitsubishi Motors Corporation

(6) Abnormal wear of belt sides. The sides are normal if

they are sharp as if cut by a knife.

(7) Abnormal wear on teeth.

(8) Missing tooth.

TENSIONER PULLER, IDLER PULLEY

(1) Check the pulley for smooth rotation, excessive play,

abnormal noise. Replace it if necessary.

AUTO-TENSIONER

(1) Check the tensioner for oil leaks. Replace it if necessary.

(2) Check the rod end for wear or damage. Replace the

tensioner if necessary.

(3) Measure the rod projection length. If not within the

standard value, replace the tensioner.

Standard value: 11 mm

(4) Press the rod by a force of 98 to 196 N an d measure

the rod stroke. If not within the standard value, replace

the tensioner.

Standard value: 1 mm or less

Rounded edge

Abnormal wear

(Fluffy strand)

Rubber exposed

Tooth missing

and canvas

fiber exposed

11 mm

98 to 196 N

Stroke

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 170 171

No comments

Mitsubishi 4G9 series Specifications Page 46