Mitsubishi G-50A Specifications download pdf (Page 17)

– 16 –

4 - 2 - 2 Collective operation setting

• A collective operation setting and a collective prohibit setting can be performed for all the group managed by this

controller at one time.

(1) Collective operation setting

1 Press the switch to set "COL. (COLLECTIVE)" in blinking

display and press the

ENTER

switch on the group operation setting screen.

2 The collective operation setting initial screen is displayed.

3 Select the items for operation setting on the collective operation setting

initial screen.

The operation method is same as described in section "4-2-1 Group

operation setting" (Page 12).

NOTE:

The items which were not set, remain set to the same condi-

tion that were set before the collective operation was per-

formed.

4 The items selected for the operation blink on the collective operation

setting screen.

5 When all setting are completed, press the switch to display

the "SET" in blinking display for the indicated function area.

6 Press the

ENTER

switch one time to complete this setting.

The collective setting is executed.

The collective setting takes approximately 20

seconds.

The collective setting is completed when the previ-

ous items light. (After the setting are completed,

start from step 3 to perform operation again if

change operation are required.)

NOTE: The display of setting contents is erased

when shift to another screen.

WT03945X02_En_P01-35 07.3.23, 8:13 PM16

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

No comments

Mitsubishi G-50A Specifications Page 17