Mitsubishi G-50A Specifications download pdf (Page 20)

– 19 –

4 - 3 Timer operation

• A weekly schedule setting can be specified for each group.

• Possible to set on the timer the schedule to prohibit operation of the local remote controller in addition to ON/OFF

schedule.

NOTE:

• Always set to current time on the current time setting screen when the schedule setting is performed.

Refer to section "4-5 Current time setting".

• To perform a scheduled operation, make the settings that are explained under items (1) (p.20), (2)

and (3) (p.21), and set the Timer mode switch on the OPERATION SETTINGS screen to ON.

Refer to section "4-2 Operation setting".

• When browser monitoring, or schedule setting from central monitoring PC, was performed, the timer

screen of this function cannot be used.

• When the "Annual/Weekly Schedule" is used, the "Timer" menu will not appear on the menu screen.

• When an external input signal that corresponds to "Emergency Stop" or "Level Run/Stop" is being

input, timer operation will not be performed.

1 The ON and OFF (PROHIBITION and PERMISSION) times can set in 10-minute units.

2 The daily operation schedule can include up to three ON (PROHIBITION) time settings and three OFF

(PERMISSION) time settings.

3 Three types (P1-P3) of daily ON/OFF pattern and one type (P4) of prohibition/permission pattern* are available

respectively, each of which can be set every to each group.

* "Prohibition/Permission" setting can only be made collectively for all applicable items; it cannot be set individually for each item.

Week day which is not set in timer pattern is displayed with (-).

In addition, it is also possible to set the schedule which has combined P1-P3 and P4 together.

( / / ) In this case, both of ON/OFF pattern and prohibition/permission pattern are daily executed.

Any one of these options may be selected for each separate day of the week.

4 The schedule patterns can be copied easy to other group by the memory and memory read functions because

the schedule contents can be recorded in the memory.

5 The setting temperature or set-back value setting can also be supported during timer operation.

Press the

switch to select

"3 SCHEDULE SETTING".

Press the

BACK

SCREEN

switch to go back to the

user operation menu screen.

Press the

switch to move the cursor position

to P1 (or P2 or P3 or ).

(The "P1" indication blinking.)

And press the

ENTER

switch to the

P1 (Pattern 1) Schedule pattern

setting screen.

User operation menu

Press the

BACK

SCREEN

switch.

• Schedule pattern (P1~P3, ) setting

can be performed.

Schedule pattern setting screen

• The schedule contents of each group

can be monitor.

• Weekly schedule pattern setting can

be performed.

Weekly schedule setting screen

WT03945X02_En_P01-35 07.3.23, 8:13 PM19

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments

Mitsubishi G-50A Specifications Page 20

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Mitsubishi G-50A