Mitsubishi PLA-RP Installation Manual download pdf (Page 12)

Changes the selection(No.).

Unit No.

"1-4"

Refrigerant address No.

"00-15"

Outlet No.

"1-4"or "0"

Up/Down air direction

5 steps or

cancel

Press for 2

seconds to

change / cancel

"Fixed airflow

direction mode".

Press the button with either refrigerant

address No., unit No. or outlet No. blinking, ...

Only the air conditioner with the No. on remote

controller and its outlet are set to the setting 5 of

the airflow direction. (Other outlets are closed.)

It is used to identify the air conditioner and

outlet to set.

Press the button with

Up/Down air direction indicater blinking, ...

Only the air conditioner with the No. on Remote controller

and its outlet are fixed at "Up/Down air direction"

which is blinking.

This is used only to decide direction conclusively.

Attention: Be careful not to set wrong air conditioner.

Attention

PAR-21MAA

ON/OFF

FILTER

CHECK

OPERATION

CLEAR

TEST

TEMP.

BACK DAY

MONITOR/SET

CLOCK

ON/OFF

Set temperature buttons

Down

Mode button (Return button)

ON/OFF button

Fan Speed button

Filter button

(<Enter> button)

Check button (Clear button)

Resets the fixed airflow direction mode.

Sends the information on

remote controller display.

·Refer to the next page for details.

Moves between the selected(blinking)

parts.

Unit No. Outlet No.

Up/Down air direction

Refrigerant addres No.

6. Electrical work

< Process for setting >

[1] To turn off air conditioner and change the remote

controller to "Fixed airﬂ ow direction mode"

1.Press ON/OFF button

to turn off the air conditioner.

2.Press Fan Speed button and Filter button

for more than 2

seconds simultaneously and it becomes the ﬁ xed airﬂ ow direction

mode after a while.

Air blows downward after it becomes

"fixed airflow direction mode"

"Fixed airflow direction mode" display

Note: "0" indicates

all outlets.

MITSUBISHI

ELECTRIC

label

Outlet No.4

Outlet No.2

Outlet No.3

Outlet No.1

Outlet No.

Unit No.

Up/Down air direction

Refrigerant addres No.

[2] To select and identify the outlet to set

1.Press Set Temperature button

to change number with the outlet No.

blinking. Select outlet No. to set.

2.Press Filter

button

to send the information on remote controller.

3. Wait for 15 seconds . How does the air conditioner run?

Only the air from the selected outlet blows downward.

Go to step[3].

Air from the wrong outlet blows downward.

Repeat 1 and set again.

All outlets are closed.

The numbers of the air conditioner (refrigerant address No.,

Unit No.) are wrong. Refer to How to ﬁ nd air conditioner No..

[3] To ﬁ x air direction

1.Press Mode button (Return button)

to blink Up/Down air direction

indicater.

2.Press Set Temperature button

until the direction to set is chosen.

3.Press Filter button

to send the information on remote controller to

air conditioner.

4.Wait for 15 seconds . How does the air conditioner run?

Airﬂ ow direction is set in the selected direction.

The ﬁ xed setting completed (Go to step [4].)

Airﬂ ow direction is set in the wrong direction.

Repeat 2. and set again.

Air direction changes

This indicates NO FIXED SETTING(canceled)

Up/Down air direction

Unit No. Outlet No.

Refrigerant addres No.

[4] To cancel "Fixed airﬂ ow direction mode"

1.Press ON/OFF button

to cancel "Fixed airﬂ ow direction mode".

It is also canceled by pressing Fan Speed button

and Filter button

for more than 2 seconds simultaneously.

2.Do not operate remote controller for 30 seconds after the "Fixed airﬂ ow

direction mode" is canceled. It does not accept even if it is operated.

Operation buttons (During the ﬁ xed airﬂ ow direction mode)

RG79D251K01_EN_0227.indd 12RG79D251K01_EN_0227.indd 12 28/02/2007 09:48:5728/02/2007 09:48:57

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Comments to this Manuals

No comments

Mitsubishi PLA-RP Installation Manual Page 12

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi PLA-RP