Mitsubishi MSH-24NV Service Manual download pdf (Page 34)

DISASSEMBLY INSTRUCTIONS11

”w” shows the terminals with a lock mechanism,

so they cannot be removed when you pull the

lead wire.

Be sure to pull the wire by pushing the locking

lever (project part) of the terminal with a finger.

1Slide the sleeve.

2Pull the wire while pushing the locking lever.

OPERATING PROCEDURE PHOTOS

1. Removing the electronic control P. C . board.

(1) Pull out the upper part of the grill. ( photo 1 )

(2) Remove the screws of the grill.

(3) Remove screws of terminal block cover.

Remove the terminal block cover and remove the terminal

block.

(4) Remove the screws of the electronic box cover.

(5) Pull out the electronic control P. C. board.

2. Removing the indoor fan motor

(1) Remove the grill. ( Refer to 1(1) (2) )

(2) Remove the screws of the pipe support assembly.

(3) Remove the fan casings.(upper) .

(4) Disconnect the connector of the indoor fan motor.

(5) Disconnect the ground wire of the fan motor.

(6) Remove the screws of the motor band and remove the

catch.

(7) Take out the sirocco fan and the indoor fan motor .

Photo 1

Photo 2

Photo 3

Photo 4

Screws

Electronic box

Fan casing

(upper)

Indoor fan motor

Screws

Fan

casing(upper)

Motor band

Terminal block

11-1.MCFH-24NV-

INDOOR UNIT

OB266--2.qxp 01.4.13 10:31 AM Page 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments

Mitsubishi MSH-24NV Service Manual Page 34

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi MSH-24NV