Mitsubishi CS-40507 Instruction Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
15
5. PARAMETER DEFINITIONS
Depending upon which Modbus Plus master device is being used, data
registers may be referenced using a 5-digit(4nnnn) or 6-digit(40nnnn)
format. For convenience, this manual uses the 5-digit format. When using
the 6-digit format, the last 4 digits of the register remain the same and a
zero is inserted between the numeral 4 and the 4-digit register
number(nnnn).
The Modbus Plus option card generates error codes when inappropriate
operations occur. These codes are stored in register 40020(9C54h)
If a write occurs to the inverter while the inverter is in EXT mode, a 41h will
exist in register 40020. If a write occurs to the Real Time Monitor or the
Alarm History, 42h will exist in register 40020. 43h will exist in register
40020 if an out of range value is written to any parameter. See more error
code listings in the table below:
Error Codes for FR-A5NM
Error codes for FR-A5NM are stored in Extended Error Code Register
40020.
*1 Writing invalid data to Op Mode Register 40010 is not allowed and answered
"01 unsupported task" in the Error Code Register 40020.
*2 Access to undefined Registers in A5NM is answered "01 unsupported task" in
the Error Register 40020.
*3 Reading invalid Monitor data, writing to Pr. 77, Pr. 79 are answered "01
unsupported task" in the Error Register 40020.
Code Definition Explanation
01h Unsupported Task (*1, 2, 3) You request an unsupported Task.
03h Invalid Register You use an undefined register.
04h DPR Read Failure
You cannot read such data from Dual
Port RAM.
05h Write Cmd Failure You cannot write data to this register.
41h Mode Error
e.g. You try to write to the register
41000(Pr. 0) while inverter is running.
42h Instruction Error
e.g. You try to write to Real Time Monitor
because it is read only.
43h Data Range Error
You try to write an out of range data to
this register.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Comments to this Manuals

No comments