Mitsubishi VS-5041 Operator's Manual download pdf (Page 10)

name0

TilflE

CRUSUBTM

50 INCH

Operator’s Manual

4.1

Set-Up and Test

IMPORTANT: Pelform this procedure in the sequence indicated.

System initialization is performed as follows:

a. Open the COIN door to gain access to the Service Panel

b. Remove hands/feet from the controls.

While pressing the SERVICE button, toggle the TEST switch ON.

d. Release the SERVICE button.

The GUN INITIALIZE Menu screen will appear as shown in Figure

Use the gun to select the [Standard] Initialization, and step on the

pedal to enter.

With the [Standard] Initialization screen displayed, step on the pedal to

bring-up the Gun Calibration screen.

Aim the gun at the

‘X’,

pull the trigger, and return to the Initialization

screen.

Verify gun response by shooting in the entire area bounded in white. If

properly initialized, a green target will appear in each location hit.

Verify that the gun can be successfully fired several times per second.

Turn the TEST switch OFF, then ON again, and the TEST MENU screen, as

in Figure 3, will appear.

From the MAIN MENU, select and adjust the following set-up options to suit

the installation requirements:

Coin Options

Game Options

Sound Test (output level adjustment)

Note: NAMCO recommended options are shown on test screens.

Verity proper operation of game controls from the l/O TEST MENU.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

No comments

Mitsubishi VS-5041 Operator's Manual Page 10