Mitsubishi VS-5041 Operator's Manual download pdf (Page 18)

namco-

7r’Wii~

$AIJISTM

INCH

ODerator’s Manual

(a) Gradation Pattern

(b) Crosshatch Pattern

[CRT]

[Projector]

(d) White Window

P-L

(e) Interlace Pattern

(f)

View Angle Adjust

[CRT]

(g) View Angle Adjust

[Projector]

(h) Full White

Monitor Test Descriptions

Four bars (G, R, B, W from top to bottom) with 15 gradations

each are displayed.

Green Grid is displayed. Lines should be reasonably straight,

undistorted and uniformly bright across screen. (If not contact

Namco. Also, see Troubleshooting notes).

White Grid is displayed. This can be used to check monitor

convergence. Slight non-convergence (R, G or B showing) is

normal.

Used to check light output (contrast) of screen. WHITE [H]

reading should be 40 to 80 f&L. Monitor contrast adjustments

accessible via the Remote Control Monitor Setup Menu.

A pattern of line blocks is displayed, used for indication of

vertical hold adjustment. On the center pair of line blocks, the

top line of the right block of lines should be aligned with the

space between the first and second lines of the left block.

Green Screen, with black frame, used at factory to set the

VERT height,

HORIZ

width, and VERTIHORIZ centering.

Crosspoint should be in the center of the screen. Horizontal

width should be set for slight overscan. If adjustment is

required (Ex: New Monitor). Refer to Monitor Adjustment

Section.

Black Screen, with white frame. Crosspoint should be in

center of screen.

Used to check White Screen light output. (Nominally

15-20

ft-

L).

Note: Push Start to Return from Monitor Test Screen to Monitor Test Menu.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 49 50

Comments to this Manuals

No comments

Mitsubishi VS-5041 Operator's Manual Page 18

Comments to this Manuals

Related products and manuals for Projection TVs Mitsubishi VS-5041