Cberator’s
Manual
namecr
UUVilE
CR030~TM
50 INCH
Figure 5-3 Solenoid Plunger Detail
9. When reassembling the solenoid, pay particular attention to the order of
E-rings and spacers. Make sure the solenoid harness faces downward
upon reassembly.
Figure 5-4 Solenoid Reassembly
5.3.3 Trigger Switch Replacement
1. Remove the gun covers and gun side halves.
2. Remove the two screws that attach the microswitch to its bracket.
3. Remove the two connectors that attach the trigger microswitch to the gun
harness, and replace the switch.
4. Upon reassembly, check the condition of the trigger spring.
Comments to this Manuals