Mitsubishi MSZ-HC35VA Service Manual download pdf (Page 40)

12-1. MUZ-HC25VA MUZ-HC35VA MUZ-HC35VAB

NOTE: Turn OFF power supply before disassembling.

OPERATING PROCEDURE PHOTOS

1. Removing cabinet and panels

(1)

Remove the screw fixing the service panel. (Photo 2)

(2)

Pull down the service panel and remove it. (Photo 2)

(3) Disconnect the power supply and indoor/outdoor con-

necting wire.

(4)

Remove the screws fixing the top panel. (Photo 1)

(5) Remove the top panel. (Photo 1)

(6) Remove the screws fixing the cabinet. (Photo 1)

(7) Remove the cabinet.

(8) Remove the screws fixing the back panel.

(9) Remove the back panel.

Photo 1

Screws of

the cabinet

Photo 2

Screw of the

service panel

Direction to

remove

Hooks

Service

panel

Screws of

the top panel

Screws

of the

top panel

(1) Slide the sleeve and check if there is a locking lever or not. (2) The terminal with this connector has the

locking mechanism.

Slide the sleeve.

Pull the terminal while

pushing the locking

lever.

Hold the sleeve, and

pull out the terminal

slowly.

Connector

Sleeve

Locking lever

<"Terminal with locking mechanism" Detaching points>

The terminal which has the locking mechanism can be detached as shown below.

There are two types (refer to (1) and (2)) of the terminal with locking mechanism.

The terminal without locking mechanism can be detached by pulling it out.

Check the shape of the terminal before detaching.

DISASSEMBLY INSTRUCTIONS

1 2 ... 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Mitsubishi MSZ-HC35VA Service Manual Page 40

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi MSZ-HC35VA