Mitsubishi DX-TL930E Instruction Manual Page 10
- Page / 77
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
10
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
■ How to use JOG dial and SHUTTLE ring
This unit is available to set the operating conditions on the
menu display, depending on the purpose. There are some
difference in the setting process between each menu. The
following explains the basic setting process which uses the
JOG dial and the SHUTTLE ring.
♦ Setting the character size
Example: Setting the CHARACTER SIZE to “LARGE” (the
default setting is “SMALL”).
1. Press the SET UP button on the front of the Unit.
• The <MENU SETTING> menu will appear.
<MENU SETTING>
@TIME DATE DISPLAY
MPX FUNCTIONS
TIMER PROGRAM
2. Make sure that the cursor is set to the TIME DATE DISPLAY
and turn the SHUTTLE ring to the right.
• Turning the SHUTTLE ring to the right displays the next
menu.
SHUTTLE ring
3. Turn the JOG dial to select the CHARACTER SIZE.
• Turning the JOG dial to the right moves the cursor downward.
Turning the JOG dial to the left moves the cursor upward.
JOG dial
4. Turn the SHUTTLE ring to the right to flash the sub-item.
• The sub-item “SMALL” will start flashing.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
2
SMALL
OFF
While the sub-item is flashing, the menu display
will not disappear when you press the SET UP but-
ton.
5. Turn the JOG dial to change the sub-item to “LARGE”.
• The “LARGE” will start flashing.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
2
LARGE
OFF
6.Turn the SHUTTLE ring to the right to enter the selection.
• The sub-item will stop flashing.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
2
LARGE
OFF
♦ Exiting the menu
The following explains how to exit the menu after its set-
ting by using JOG dial and the SHUTTLE ring.
Example: Exiting the <TIME DATE DISPLAY> menu after
setting the character size.
1. Make sure that the sub-item of the selected item is not
flashing and changed correctly.
• If the sub-item is flashing, that item is not entered. See
steps 4 on the left and enter the setting.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
2
LARGE
OFF
• To set additional settings or to confirm the settings, turning
the SHUTTLE ring once to the left displays the previous menu.
This operation is not available while the sub-item
is flashing.
<MENU SETTING>
@TIME DATE DISPLAY
MPX FUNCTIONS
TIMER PROGRAM
2. Turn the SHUTTLE ring twice to the left .
• The display will return to the present time display.
• Pressing the MENU button which is pressed to display the
MAIN MENU also returns the menu display to the present
time display.
SEARCHCOPY
SET UP
INFO
MENU
INFORMATION
There are 4 different types of MAIN
MENU as shown below:
1) The <MENU SETTING> menu (press the SET
UP button to display the menu).
<MENU SETTING>
@TIME DATE DISPLAY
MPX FUNCTIONS
TIMER PROGRAM
RECORDING SET UP
USER KEY
DATA CLEAR SELECTION
REAR TERMINAL
SERVICE
INITIAL SET UP
2) The <SEARCH SELECTION> menu (press the
SEARCH button to display the menu).
<SEARCH SELECTION>
@TIME DATE SEARCH
INDEX SEARCH
SKIP SEARCH
ALARM LIST SEARCH
JUMP TO START POINT
3) The <INFORMATION> menu (press the INFO
button to display the menu).
<INFORMATION>
@RECORDED PERIOD
CONNECTED SCSI DEVICE
<ELAPSED TIME>
MAIN 2H
ARCHIVE 0H
COPY 0H
Basic Operations
- DX-TL930E 1
- Features 2
- Caution and care 3
- Contents 4
- Beginning 5
- Multplex 6
- Basic Operations 10
- Basic Operations (continued) 12
- INFORMATION 15
- Connections 17
- Initial settings 19
- Initial settings (continued) 20
- Menu displays 21
- Menu displays (continued) 22
- Operations 23
- ■ SEARCH SELECTION MENU 23
- ■ COPY SELECTION MENU 23
- How to set up 24
- Various settings 24
- <REAR TERMINAL> 26
- @MODE OUT PLAY 26
- CAPACITY REMAIN HDD-10% 26
- <CALL OUT> 27
- HDD(ID:0~3) FULL 27
- @ARCHIVE(ID:4) NONE 27
- CALL OUT 28
- @BUZZER REMAIN 28
- RS-232C SETTING 28
- ■ Initial set up 29
- Various settings (continued) 30
- HDD FULL STOP 31
- HDD PB REPEAT STOP 31
- @AUTO EJECT OFF 31
- ARCHIVE DATA ALL 31
- Various recording settings 33
- 1M 2M 5M 10M 34
- 45S 30S 15S MAN 34
- 30 20 10 35
- Enlarged 37
- ♦ SPLIT 4 setting 40
- ♦ SEQUENTIAL setting 40
- Operation examples 41
- Using the Timer 43
- Using the Timer (continued) 44
- Alarm recording number 45
- Alarm Recording (continued) 46
- ■ Series Recording 47
- ■ Shot Recording 48
- Various search 50
- Making copies 52
- ■ Backup operation 53
- Making backups (continued) 54
- Other convenient functions 56
- RS-232C settings 56
- BUZZER KEY 57
- @RS-232C SETTING 57
- Command code 58
- / Command codes 58
- Command codes (continued) 59
- MPX FUNCTIONS 61
- Command Codes 63
- REAR TERMINAL 65
- INITIAL SET UP 65
- COPY SELECTION 67
- SEARCH SELECTION 67
- / Character Search 69
- Alphabet 70
- Field/sec 71
- Troubleshooting 73
- / Glossary 74
- Warnings and CALL OUT output 75
- Specifications 76
- 872C199C7 PRINTED IN JAPAN 77
Related products and manuals for Recording Equipment Mitsubishi DX-TL930E
(26 pages)
(66 pages)
(23 pages)
(35 pages)
(32 pages)
(20 pages)© 2020, manymanuals.com. All rights reserved. | 0.533 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals