Mitsubishi DX-TL930E Instruction Manual download pdf (Page 27)

ENGLISH

•

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

3. Turn the JOG dial until the cursor is next to “CAPACITY

REMAIN” and turn the SHUTTLE ring to flash the sub-item.

• The sub-item of the device will start flashing first. Choose

the device you want to set by using the JOG dial and SHUTTLE

ring. Then sub-item of the remain will start flashing.

<REAR TERMINAL>

MODE OUT PLAY

CAPACITY REMAIN HDD-10%

4. Turn SHUTTLE ring and JOG dial to show “HDD-50%” and

turn the SHUTTLE ring to the right to complete setting.

By turning the JOG dial, the sub-

item of CAPACITY REMAIN shown on the menu will

be changed as follows:

HDD ARC NONE

By turning the JOG dial, the sub-

item of CAPACITY REMAIN shown on the menu will

be changed as follows:

8% 6% 4% 2% 50%

10% 15% 20% 30% 40%

5. Turn the SHUTTLE ring to the left or press the SET UP

button.

♦ CALL OUT setting

With this setting, the signal from CALL OUT terminal can

be emitted externally to indicate the warning given from

this unit. The signal is emitted from the CALL OUT termi-

nal when the remaining storage capacity of main HDD

reaches the preset amount. Likewise, the remaining stor-

age capacity of archive medium can be set. The CALL OUT

signal is also emitted when HDD FULL in the <INITIAL SET

UP> menu is set to “STOP”.

INFORMATION

For more on the relation between

Warning Display and CALL OUT emission, please

refer to page 75. When the emission parameter in

CALL OUT is set to “Yes”, the warning display will

appear unconditionally; when the parameter is set

to “Selectable”, the unit can be made to emit a CALL

OUT signal through additional settings. For exam-

ple, when the BUZZER setting on the <REAR TER-

MINAL> menu is set to “KEY”, the unit will sound a

buzzer when the remaining amount on the hard disk

has reached the figure specified on the <CALL OUT>

menu.

Example: Setting CALL OUT of main HDD to “10%” (the

default setting is “FULL”) and CALL OUT of archive me-

dium to “20%” (the default is “NONE”).

1. Press the SET UP button to display the <MENU SETTING>

menu.

2.Turn the JOG dial to move the cursor to REAR TERMINAL

then turn the SHUTTLE ring to the right.

• The <REAR TERMINAL> menu will appear.

<REAR TERMINAL>

@MODE OUT REMAIN

CAPACITY REMAIN HDD-10%



CALL OUT

3. Turn the JOG dial until the cursor is next to “CALL OUT”

and turn the SHUTTLE ring to the right to show the <CALL

OUT> menu.

<CALL OUT>

@HDD(ID:0~3) FULL

ARCHIVE(ID:4) NONE

4. Confirm that the cursor is next to “HDD” and turn the

SHUTTLE ring to the right to flash the sub-item.

<CALL OUT>

@HDD(ID:0~3) FULL

ARCHIVE(ID:4) NONE

5. Turn the JOG dial to flash “10%” and turn the SHUTTLE

ring to the right to complete setting.

<CALL OUT>

@HDD(ID:0~3) 10%

ARCHIVE(ID:4) NONE

By turning the JOG dial, the item

of CALL OUT shown on the screen switches as

shown below:

FULL 2% 4% 6% 8% 10%

NONE 50% 40% 30% 20% 15%

“NONE”: No signal is emitted from the CALL OUT

terminal.

6. Turn the JOG dial until the cursor is next to “ARCHIVE” and

turn the SHUTTLE ring to the right.

• The sub-item will start flashing.

<CALL OUT>

HDD(ID:0~3) FULL

@ARCHIVE(ID:4) NONE

7. Turn the JOG dial to flash “20%” and turn the SHUTTLE

ring to the right.

• The sub-item stops flashing.

<CALL OUT>

HDD(ID:0~3) 10%

@ARCHIVE(ID:4) 20%

8. Turn the SHUTTLE ring to the left or press the SET UP

button.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 76 77

Comments to this Manuals

No comments

Mitsubishi DX-TL930E Instruction Manual Page 27

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi DX-TL930E