Mitsubishi DX-TL930E Instruction Manual download pdf (Page 40)

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•

5. Check that the top left number (default setting is set to

)

is flashing. Turn the JOG dial to display the desired camera

number then turn the SHUTTLE ring to the right to fix setting.

• The flashing will move to the next camera number.

@SPLIT9

1 2 3

4 5 6

7 8 9

6. Set all camera numbers according to the steps written on

the previous page.

7. Check that all camera numbers are set .Turn the SHUTTLE

ring to the right to fix setting.

• The flashing will stop.

• Settings cannot be made when the same camera number is

in SPLIT 9 setting mode. When the same camera has been

selected, the blinking light will return to its original state even

if all the camera numbers have been input. Check to see if

the same camera number has been entered; if the same

number has been entered, please change the settings.

@SPLIT9

1 2 3

4 5 6

7 8 9

8. Press the SET UP button.

• The <SPLIT SCREEN SETTING> menu will disappear.

You cannot exit the menu if you set same cam-

era numbers at different positions. In this case,

please change settings.

♦ SPLIT 4 setting

SPLIT 4 setting mode, you can choose between a to c of

SPLIT 4 display mode. Before you choose the setting, ar-

range the camera position as you like in this section.

1. Press the SET UP button to display the <MENU SETTING>

menu.

2. Turn the JOG dial to move the cursor to MPX FUNCTIONS

and turn the SHUTTLE ring to the right.

• The <MPX FUNCTIONS> menu will appear.

3. Turn the JOG dial to move the cursor to SPLIT SCREEN

SETTING then turn the SHUTTLE ring to the right.

• The <SPLIT SCREEN SETTING> menu will appear.

CAMERA SETTING

@SPLIT SCREEN SETTING

SPLIT P.GRADE SHARP

4. Make sure that the cursor is next to “SPLIT4a”. Turn the

SHUTTLE ring to the right.

@SPLIT4a SPLIT4b SPLIT4c

1 2

3 4

5 6

7 8

1 2

3 9

5. Repeat steps 5 to 7 of SPLIT 9 setting on this page to set

the rest of the position.

• You cannot set the same number in SPLIT 4 setting. If the

flashing goes back to the original position, you have to

change settings to make sure the same camera numbers are

not set at different positions.

6. Press the SET UP button.

• The <SPLIT SCREEN SETTING> menu will disappear.

♦ SEQUENTIAL setting

The sequential setting is designed to automatically switch

the on-screen image in the order in which the connected

cameras are displayed. The switching time can be set as

well. It is also possible to automatically switch between the

three display patterns available in SPLIT 4 of the SPLIT

SCREEN SETTING. The same camera can also be regis-

tered repeatedly.

1. Press the SET UP button to display the <MENU SETTING>

menu.

2. Turn the JOG dial to move the cursor to MPX FUNCTIONS

then turn the SHUTTLE ring to the right.

• The <MPX FUNCTIONS> menu will appear.

3. Move the cursor to SEQUENTIAL then turn the SHUTTLE

ring to the right.

• The <SEQUENTIAL> menu will appear.

4. Turn the JOG dial to select the desired camera number,

then turn the SHUTTLE ring to the right.

• The channel number will start flashing.

<SEQUENTIAL>

SEQ. 1

2

3

CH.@ TIME 1S

1S

5. Turn the JOG dial till desired channel number appears and

turn the SHUTTLE ring to the right to enter the selection.

• The flashing will move to “TIME”.

<SEQUENTIAL>

SEQ. 1

2

3

CH.@ TIME 1S

1S

6. Turn the JOG dial to display desired length of time then turn

the SHUTTLE ring to the right to fix setting.

• Maximum of 30 seconds can be set.

<SEQUENTIAL>

SEQ. 1

2

3

CH.@ TIME10S

1S

7. Repeat steps 4,5 and 6 above to fix settings for other

cameras.

8. (If you wish to display SPLIT 4 between a to c) Turn the

JOG dial to move the cursor to SPLIT 4 and turn the SHUTTLE

ring to the right to choose pattern from abc or ab.

• The selected pattern will start flashing.

@abc

6

7

8

9

SPLIT4

10S

15S

SPLIT 4 pictures to be displayed and changed

automatically are pictures set on SPLIT SCREEN

SETTING on the <MPX FUNCTIONS> menu.

Please refer to SPLIT 4 setting on page the left.

Vertical resolution decreases when split screen

image quality(SPLIT P.GRADE) is set to “SOFT”.

Multiplexer functions (continued)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 76 77

Comments to this Manuals

No comments

Mitsubishi DX-TL930E Instruction Manual Page 40

Comments to this Manuals

Related products and manuals for Recording Equipment Mitsubishi DX-TL930E