Mitsubishi DX-TL930E Instruction Manual Page 76
- Page / 77
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
76
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Specifications
Specifications
Rated Power Supply: AC 100-240V 50/60Hz
Rated Input: 1.00-0.50A (100-240V)
Color System: PAL-type color system.
Operating Temperature: 41°F-104°F (5°C to 40°C).
Relative Humidity: Max.80(%)
Altitude: Max.3000(m)
Dimensions: 425(Width) x 380(Depth) x 113(Height)(mm).
Weight: 7.1kg
Recording System Digital recording system with JPEG compression method.
Sampling 13.5MHz
Data Compression JPEG
Compression Unit Field
Audio Recording System PCM
Resolution 684 x 288
Recording Device 30GB HDD
Video Input: 9 Input BNC-Connector: 1.0 V(p-p), 75 ohms.
Monitor Output: S-Connector: Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.286 V(p-p), 75 ohms.
BNC-Connector: 1.0 V(p-p), 75 ohms.
Throughout Output: 9 Output BNC-Connector: 1.0 V(p-p), 75 ohms.
Audio Input: -8 dBs, 50 kohms.
Audio Output: -8 dBs, 1 kohms.
Microphone Input: -67 dBs, 600 ohms.
Timer Program: 8programs-Daily start and stop time for one week x3set.
Memory Backup: Lasts for more than 1 month.
CONNECTORS
POWER ON Input: Terminal for power ON. LOW: POWER OFF / HIGH: POWER ON
POWER OFF Input: Terminal for power OFF. LOW: POWER OFF
ALARM IN(1-9) Input: Terminal for starting alarm recording.
CLOCK ADJ Input: Terminal for adjusting clock.
REC Input: Terminal for starting.
GND: Terminal for ground.
ALARM OUT Output: Terminal for output while alarm recording is under way.
MODE OUT Output: Terminal for indication of recording selected mode.
DC 5V OUT Output: Terminal for DC 5V OUT.
CALL OUT/CALL OUT GND: Terminal for external warning device.
Rating:
ALARM OUT / Active: “Low” Level. Max. Drive current 7mA DC.
MODE OUT Non active: Open. Max. Voltage +24V DC.
ALARM IN / CLOCK ADJ / Active: When terminals are short-circuited or “Low” Level voltage is applied.
REC Non active: Open.
CALL OUT / Active: ON. Max. Drive current 7mA DC.
CALL OUT GND Non active: Open. Max. Voltage +24V DC.
RS-232C RS-232C (D-SUB 9pin) terminal for connection with personal computer.
SCSI SCSI2 (Half pitch 50pin) terminal.
Accessories
AC power cord (for U.K / for the Continent) 2
Ferrite core 2
Cable tie 2
Accessory software 1
Cable (for the extra install hard disk drive) 2
Screw (for the extra install hard disk drive) 18
Stopper (for the extra install hard disk drive) 1
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
<Interface circuit inside the unit>
5V
5V
10kΩ
22kΩ
Input
terminal
0.047µF
GND
POWER ON/POWER OFF/
ALARM IN/REC/CLOCK ADJ
Input terminal
• Input Circuit
<Interface circuit inside the unit>
Output terminal
GND terminal
ALARM OUT/MODE OUT Output terminal
• Output Circuit
<Interface circuit inside the unit>
CALL OUT terminal
CALL OUT GND terminal
CALL OUT output terminal
• Output Circuit
- DX-TL930E 1
- Features 2
- Caution and care 3
- Contents 4
- Beginning 5
- Multplex 6
- Basic Operations 10
- Basic Operations (continued) 12
- INFORMATION 15
- Connections 17
- Initial settings 19
- Initial settings (continued) 20
- Menu displays 21
- Menu displays (continued) 22
- Operations 23
- ■ SEARCH SELECTION MENU 23
- ■ COPY SELECTION MENU 23
- How to set up 24
- Various settings 24
- <REAR TERMINAL> 26
- @MODE OUT PLAY 26
- CAPACITY REMAIN HDD-10% 26
- <CALL OUT> 27
- HDD(ID:0~3) FULL 27
- @ARCHIVE(ID:4) NONE 27
- CALL OUT 28
- @BUZZER REMAIN 28
- RS-232C SETTING 28
- ■ Initial set up 29
- Various settings (continued) 30
- HDD FULL STOP 31
- HDD PB REPEAT STOP 31
- @AUTO EJECT OFF 31
- ARCHIVE DATA ALL 31
- Various recording settings 33
- 1M 2M 5M 10M 34
- 45S 30S 15S MAN 34
- 30 20 10 35
- Enlarged 37
- ♦ SPLIT 4 setting 40
- ♦ SEQUENTIAL setting 40
- Operation examples 41
- Using the Timer 43
- Using the Timer (continued) 44
- Alarm recording number 45
- Alarm Recording (continued) 46
- ■ Series Recording 47
- ■ Shot Recording 48
- Various search 50
- Making copies 52
- ■ Backup operation 53
- Making backups (continued) 54
- Other convenient functions 56
- RS-232C settings 56
- BUZZER KEY 57
- @RS-232C SETTING 57
- Command code 58
- / Command codes 58
- Command codes (continued) 59
- MPX FUNCTIONS 61
- Command Codes 63
- REAR TERMINAL 65
- INITIAL SET UP 65
- COPY SELECTION 67
- SEARCH SELECTION 67
- / Character Search 69
- Alphabet 70
- Field/sec 71
- Troubleshooting 73
- / Glossary 74
- Warnings and CALL OUT output 75
- Specifications 76
- 872C199C7 PRINTED IN JAPAN 77
Related products and manuals for Recording Equipment Mitsubishi DX-TL930E
(26 pages)
(66 pages)
(23 pages)
(35 pages)
(32 pages)
(20 pages)© 2020, manymanuals.com. All rights reserved. | 2.400 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals