Mitsubishi SR-SD1 Specifications download pdf (Page 31)

CHAPTER 4 SYSTEM CONNECTION

4.2 Connection of Control Unit

4.2.5 Connecting of Hard Disk Drive

The procedures for connecting the hard disk drive are shown below.

(1) Open the control unit cover, and remove the HR841 card.

HR841

(2) Connect the control unit and hard disk with a cable.

Refer to 4.2.5 (3).

(Note 1) Use the cable enclosed with the hard disk. The max. cable length is 500mm.

(Note 2) Take care when handling the hard disk drive. (Take care not to drop or shake the unit.)

When installed vertically, keep the inclination within 15°, and lead the cable from above.

Do not connect or disconnect the cables between each unit while the power is ON.

CAUTION

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 140 141

No comments

Mitsubishi SR-SD1 Specifications Page 31