Mitsubishi 4G6 series Specifications download pdf (Page 43)

466

ENGINE

<1992>

Timina Belt

DOHC

1 IC-43

Camshaft sprocket

Timing marks

6EN0284

6ENOll

Engine with silent shafts

Screwdriver

6EN0564

r)K4

TIMING BELT INSTALLATION

(I)

Turn the two sprockets so that their dowel pins are located

on top. Then, align the timing marks facing each other with

the top surface of the cylinder head. When you let go of the

exhaust camshaft sprocket, it will rotate one tooth in the

counterclockwise direction. This should be taken into

account when installing the timing belt on the sprockets.

NOTE

The same camshaft sprocket which is provided with two

timing marks is used for the intake and exhaust camshafts.

When the sprocket is mounted on the exhaust camshaft,

use the timing mark on the right with the dowel pin hole on

top. For the intake camshaft sprocket, use the one on the

left with the dowel pin hole on top.

(2) Align the crankshaft sprocket timing marks.

(3) Align the oil pump sprocket timing marks (Engine with

silent shafts).

(4)

Insert a Phillips screwdriver [shank diameter 8 mm

(.31

in.)]

through the plug hole (Engine with silent shafts).

If it can be inserted as deep as 60 mm (2.4 in.) or more, the

timing marks are correctly aligned. If the inserted depth is

only 20

25 mm

(.8

in.), turn the oil pump sprocket

one turn and realign timing marks. Then check to ensure

that the screwdriver can be inserted 60 mm (2.4 in.) or

more. Keep the screwdriver inserted until the installation of

the timing belt is finished.

NOTE

Step

(4)

is performed to ensure that the oil pump sprocket

is correctly positioned with reference to the silent shafts.

TSB Revision

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 107 108

Comments to this Manuals

No comments

Mitsubishi 4G6 series Specifications Page 43

Comments to this Manuals

Related products and manuals for Engine Mitsubishi 4G6 series