(b) Tighten connecting rod clamping nuts to a torque
of
5.5 kgm (39.771 lb.ft).
(7) Install the retainers and gaskets
as
follows:
(a) Install retainers
(1) to the external peripheries
of
main bearing caps
No.1
and
No.3
with the
flange facing the case inside.
(b) Apply ThreeBond 1102 (adhesive) on
both
sides
of
oil pan gasket (2) and attach it
to
crankcase.
Make
sure that the gasket
is
completely attached
in
the grooves (A)
in
the caps.
(c) Apply Atomjet on the
both
ends
of
rubber
packing
(3)
and insert the packing into cap.
-42
-
Comments to this Manuals